Shopping cart : View Cart
(
0 items /
$0.00
)
Check Out
Skip Navigation LinksHome > - Purpose Built Wheels - > Easton Arc 24 29" on Chris King Hubs
Easton Arc 24 29" on Chris King Hubs
Pairing the 24mm internal Easton Arc 24 29" rim with American made Chris King hubs you have the best in performance, design and artistic value. Check out the details below.
Price :
$1,223.84 save: 20%
$984.40
Product Options
Chris King Rear Hub Options
Chris King Front Hub Options
Product kit of Easton Arc 24 29" on Chris King Hubs
Quantity
Nipple Color Options
*
1
Quantity
Chris King Ano Color Options
1
Details of Easton Arc 24 29" on Chris King Hubs

Pricing is based on:
• Chris King, 6 Bolt, 32 hole hubs with standard freehub
• Easton Arc 24 29" Rim
• Tubeless Tape and Valve Stems Installed
• DT Swiss Alloy Nipples (color options below)
• DT Swiss Double Butted 2.0/1.8  spokes (black)
• Laced in a 3 cross pattern (suggested for most riders on this build)


Read about the DT Swiss 350, 240 and Chris King hub options here


HUB DETAILS:


For riders who need the legendary rolling quality of Chris King hubs for use in the high impact demands of enduro, DH, freeride, and slope-style we developed our ISO Large Diameter (LD) front hub. Built for gravity enthusiasts, our ISO LD front hub has been ridden to multiple downhill world championships and has rolled countless riders to the top step of the podium.  The Chris King ISO Small Diameter (SD) front hub is designed for mountain bikers seeking a lightweight hub that doesn’t compromise performance.

The rear hub is designed to deliver instant pedal engagement and unequalled smoothness by combining our patented RingDrive system and our legendary made-in-house bearings. Each ISO hub is exclusively machined in our Portland, OR factory and are fully serviceable with a complete selection of replacement parts.

●  Engineered, manufactured and assembled in Portland, Oregon USA
●  5-year built-to-last warranty
●  Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
● Legendary made-in-house bearings
●  Easily serviceable and completely re-buildable with our Chris King Hub Service Tool
●  Available in 9 beautifully anodized colors
●  Responsibly lightweight
 

Spoke Interface: J-Bend
Drilling:  32 hole or 28 hole

Purpose Built Wheels by BikeCo.com

Cut-away of the proprietary Chris King Ring Drive System



RIM DETAILS:


A deep rim profile gives resolute performance and stiffness where others fail. This is not a simple size increase, this is a full re-think. And from that rethink, an optimized rim extrusion with great weight saving and Easton durability.

  • Color: Black/Gray
  • Hub Drilling: 32
  • ISO Diameter: 622 / road / 29"
  • Manufacturer Spec ERD (mm): 596mm
  • Rim Center Offset (mm): 0mm
  • Rim Depth (mm): 20mm
  • Rim Joint: Welded
  • Rim Width (Internal): 24mm
  • Tire Type: Tubeless Compatible,Clincher
  • Valve: Presta
  • Valve Length: Short
  • Weight: 455g
  • Wheel Size: 29

Looking for more information about contemporary rim width application? 

Check out this comparison of modern widths and which types of riders they benefit.



SPOKE & LACING DETAILS:


Our expert in house builders have a variety of options available to help you fine tune your wheels' performance and longevity. 

We suggest 3 Cross lacing (each spoke crosses three others between the hub and nipple) for most all mountain applications.  For maximum strength, performance and longevity our spokes contact at the cross. 

Front & Rear Wheel Build:  Our standard build on these wheels feature DT Swiss Competition spokes to provide the most crisp, longest lasting, best tracking wheels available.  Competition spokes feature a threaded section is 2.0 with a center section of 1.8 while the head is also 2.0.  The thinner center saves weight while improving ductility and stress flow.

We utilize black spokes as the hard ano coating actually improves total strength compared to any other color option.

Some riders will prefer a SuperComp / Double Butted mix on wheels like this which we are happy to build.  Shoot us an email or give us a ring if you'd like to update your spokes.


More Custom Build Options:

Nipples are available in black, silver, gold, red, green, purple, orange, blue and pink.  We are happy to build with Timing Nipples (either side of the valve stem), Alternating, Mix, or all the same color.


We offer a full line of DT Swiss spokes and are happy to quote for builds with Competition Race (2.0/1.6), SuperComp (2.0/1.7/1.8), Revolution (2.0/1.5), Competition (2.0/1.8), or Champion (2.0 or 1.8).


We build with 2 or 3 cross wheels depending on application. 


Placing an online order will default to black hubs, black nipples - want something more colorful?  Want to change spokes or pattern? Don't worry, we will contact you to help us fine tune your spec and exact build. 


Check out more information on what makes Purpose Built Wheels special



Purpose Built Wheels by BikeCo.com


Reviews of Easton Arc 24 29" on Chris King Hubs