7.5 x 2″ FOX Factory DPS 3-position EVOL LV Trunnion

This is the 7.5 x 2″ FOX Factory Float DPS with 3 position switch, EVOL LV air can, Trunnion mount
FOX Part Number: 972-01-474

SKU: RSFOX7399 7.5*2 Categories: , , Tags: , , ,

Description

Click on these tabs to learn more about the purchasing process from BikeCo.com

Availability Definitions:

IN-STOCK
Typically ready for pickup or shipment same or next business day.
Additional components may change this window (we will advise).

AVAILABLE
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), QC’d at BikeCo on the day the product lands and processed for pickup or shipment.

The FOX Factory Float DPS is the most advanced single can air shock on the market. Available in a variety of sizes, standard and trunnion mount as well as 3-position (OPEN-MEDIUM-FIRM) or remote 2-position (OPEN-FIRM) adjustments.

This is the 7.5 x 2″ FOX Factory Float DPS with 3 position switch, EVOL LV air can, Trunnion mount
FOX Part Number: 972-01-474

FOX Float DPS 3 position Trunnion Mount

Learn more about the FOX Factory Float DPS rear shock below:

FOX Float DPS

Click through these tabs to learn more about the Float DPS’s Compression, Rebound, Float EVOL and more.

Details on the Float DPS lineup include:

DPS damper with three positions – Open, Medium, Firm modes
Dual Piston valve design improves both rebound and compression flow
Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity
Factory Series models feature Genuine Kashima Coat

FOX Float DPS 3 position OPEN MEDIUM FIRM Switch

Float DPS Compression Controls

The Float DPS rear shock provides riders a 3 position Low-Speed compression (in OPEN mode) as well as a 3 position OPEN – MEDIUM – FIRM switch.

FOX Float DPS 3 Position Switch

The Float DPS 3 position switch provides riders a “climb switch” as well as a mid-setting for, well, middle types of terrain!

FOX’s Float DPS Low-Speed Compression has an additional 3 settings in the OPEN mode.

FOX Float DPS 3 position OPEN 1 2 3 Switch

Float DPS Low-Speed Compression Controls

Adjusting the black dial to 1, 2 (shown in photo) or 3 adds low-speed compression support to the Float DPS’s OPEN mode.

This allows riders to fine tune additional support for better cornering as well as modifying the shock’s bottom out characteristics (which are also changed with volume spacing selection – check out the video on the Learn More tab for more details on how your shock’s controls interact with each other for the ultimate setup)

FOX Float DPS 3 position Rebound Adjustment

FOX Float DPS Rebound Adjustability

Low-speed rebound – 11 clicks

Rebound is set to compensate for the air spring driving the shock back to neutral after compression. You can learn more about how Rebound, Air Volume, Compression and PSI interact on the Learn More tab

You can learn more about the base FOX settings here.

Float DPS EVOL Air Sleeve Details

EVOL SV and EVOL LV

SV = Small Volume
LV = Large Volume

The DPS shock’s EVOL air sleeve is generally based on the shock’s eye to eye taking into account desired ramp rate as well as fitment concerns.

Few of the shocks have EVOL LV and SV offerings, its quite rare in the modern FOX lineup. An example is the 7.875×2 which is available in both – however most are available in one or the other. If you’re interested in a specific EVOL air sleeve with a specific shock dimension reach out to our team and we will see if its possible as well as what the upcharge will be!

More on the FOX EVOL Air Sleeve

(from FOX’s site)

Float DPS Max Pressure

FLOAT DPS EVOL and FLOAT X shocks have a maximum pressure of 350psi (24.1 bar)
FLOAT DPS Non-EVOL shocks have a maximum pressure of 300psi (20.7 bar)

Using the EVOL Air Sleeve

The EVOL air sleeve comes standard on FLOAT DPS and DPX2 models. The EVOL air sleeve provides an external negative air chamber integrated into the main air sleeve to significantly reduce the force to initiate travel, providing excellent small bump performance. The system is also more linear in its progression offering improved mid stroke support and better bottom out resistance. It is important to add or remove air from the EVOL sleeve as detailed below to experience the best possible performance.

When adding air to the air chamber, it is important to equalize the positive and negative air chambers by slowly compressing the shock through 25% of its travel 10-20 times after every 50psi addition.

Adding air to the shock without periodically equalizing the air chambers can lead to a condition in which the shock has more pressure in the positive chamber than the negative. In this condition the shock will be very stiff and can top-out. You can equalize the air chambers by slowly compressing the shock until you feel and hear a transfer of air. Hold the shock at this point for a few seconds to allow the air to transfer from the positive to the negative chamber.

When releasing air from the air chamber, it is important to do this slowly so the shock can transfer air from the negative to positive chamber and then be realeased through the Schrader valve.

Releasing the air pressure too quickly can induce a condition in which the negative chamber has more pressure than the positive chamber. In this condition the shock will compress into its travel and not fully extend. You can remedy this by adding air pressure until the shock extends, then slowly compressing the shock through 25% of its travel 10-20 times.

 

Learn More about the FOX DPS, DPX2 and Float X Shocks at RideFox

Check out a quick video to learn more about how your MTB suspension functions and how each setting interacts with the others.

Float DPS: FOX Performance vs. Factory Kashima

There are a couple notable upgrades to the Factory DPS rear shocks compared to the FOX Performance lineup.

Low-Speed Compression

This is the biggest difference. The FOX Factory DPS offers a 3 position OPEN – MEDIUM – FIRM as well as the 3 position adjustability in the OPEN mode via the black adjuster (swings the point to 1 – 2 – 3 on the blue lever). This allows riders to use a low-speed damper control as well as volume spacing to fine tune the DPS’ support and bottom out.

This feature is exceptionally notable as your ground speeds increase as well as for larger riders.

Kashima Coating vs Black Ano

Without access to all of FOX’s testing I’m referencing my years of experience riding both FOX coatings as well as our background on custom shock manufacturing and tuning.

The Black Ano coating works well. I ran a Performance Elite fork with the black ano for years without noticing any wear in the coating.

The Kashima coating is slightly more “slippery” – which means less stiction – probably more notable for smaller riders.

When BikeCo has done custom internals or custom branded shocks we work closely with our coating specialists. Many of the additive packages aimed at producing a surface with less surface friction have an additional benefit that they work really well at negating or minimizing heat input on the shaft. This helps minimize performance changes to the shock during a fast run with thousands of shaft inputs. BTW: these additive packs tended to produce a rich, brown color… Just saying…

So in conclusion: Factory Shocks have notable advantages in overall tuning setup as well as direct benefits for large and small riders on different sides of the spectrum!

Comparing the Float DPS to other shocks

Designed for everything from XC race to light enduro the FOX Float DPS can be tuned for a wide range of riders in an even wider range of terrain.

As far as single can shocks the Factory DPS is the class leader with the most robust, confident performance and tuning controls to help you get your bike’s setup dialed in.

For bikes with tight clearance or smaller shock measurements the FOX Float DPS is the premium option.

Riders looking for additional heat capacity and a wider range of low-speed compression or rebound tuning will look at the FOX Float X which provides more “thump” than the poppier DPS shock.

Buy with BikeCo: Advantages

Shopping suspension? There are notable reasons to work with The Bike Company. We care about Expertise & Experience: Yours!

Our staff is excited to help you get the right product, setup for your riding. Whether you’re looking to understand your product front to back or simply want to know you got the best product for your needs dialed in for your riding we are here for you.

BikeCo.com Pro Tune Suspension

Ready to take your Fox Float DPS’s performance to the next level? Then it’s time for BikeCo’s Pro Tune Suspension.

BikeCo’s suspension tuners take Fox’s excellent performing forks and shocks and personalize the tune parameters to your specifics.

We will contact you for a riding bio to assess your riding level, terrain, riding disposition, ground speeds, etc. Our proprietary modifications then narrow the fork’s performance window, and thus improve the adjust-ability for you!

Out of the box Fox makes a great product. But it has to “fit” everyone. From the lightweight, smooth rider to a biggest, burliest basher. And everything in between. Well, chances are you’re somewhere in a narrower window with your riding… Let’s dial it in for you.

After Sales Service from BikeCo.com

Another aspect that sets BikeCo apart is our after sales service. The best components for each budget is the first step. Dialing in the exact setup combination is the next step. No other shop has the experience to help you understand and setup modern mountain bikes.

Our team will reach out with a variety of loaded questions to help you find that “ah-ha” moment with your bike. A click here, a turn there, a bit of stack, a couple PSI – it can be intimidating. But not for BikeCo clients. We’re here by phone, email, chat or in-store to help you enjoy your MTB.



Return to Top of Page

Additional information

Color
Shop by Brand

fox

MPN
Size
UPC
Rear Shock Brand

FOX

Brand

FOX

Rear Shock: Stan/Trun

Trunnion

Rear Shock Size

7.5×2

Rear Shock Model

DPS