Description
Ibis 148 Derailleur Hanger, 12×148
This is the derailleur hanger for the Ibis Boost frames like the HD5, Ripmo, Ripley, Ripmo AF and Ripley AF.
Designed for Ibis12x148mm rear axles, with different hardware configuration it will work on the 142 models, this derailleur hanger fits the following frames:
DV9, HKMX, Mojo SLR, Mojo HD / HDR, Mojo HD3 – 5, Mojo 3 – 4, Ripley 1 – 4, Ripmo 1 – 2, Ripmo AF, Ripley AF
Includes 12mm fixing bolt for boost models and Hakka MX. Older 142 models use a 6mm fixing bolt sold separately.
The hanger designed for the Boost spacing bikes will fit all previous 142 models(Ripley, HDR & SLR). It does not require the backing nut of the two-piece fixing bolt assembly as the new hanger has threads built in for the standard chainring bolt used.
Universal, well…
The Ibis EXIE uses the SRAM UDH, SRAM PN: AC-DRHG-MTB-A1, or “Universal” Derailleur Hanger. As a quick definition, the UDH will only be “universal” for bikes designed to use that hanger. The UDH will not work on other Ibis models.
If you need the UDH for an Exie follow the link below!
Ibis Frame Accessory Kit
We often suggest riders put an extra derailleur hanger, axle and bearing kit in their toolbox.
Ibis Derailleur Hanger (this page)
This is the derailleur hanger for the Ibis Boost frames like the HD5, Ripmo, Ripley, Ripmo AF and Ripley AF.
Ibis 12×148 Axle, 12×1.5 Thread Pitch
Ibis EXIE uses the SRAM UDH, Universal Derailleur Hanger
Lower Link Kit, Bushing Type 09-500 for RipMo 2&1, RipMo AF, Ripley AF, HD5 and Ripley V4.
Ibis Upper Link Kits: Ripmo, RIpmo AF, Ripley, Ripley AF and Mojo 4