Ibis Exie Complete
Build TBD
M, Bug Zapper Blue
In-Bound

$7,999.00

 Ibis Exie, M Bug Zapper Blue

In-Bound Due Late September Contact us today about this Ibis Exie Complete Medium Bug Zapper Blue.

We are able to spec any of the Ibis carbon kits for you on this frame:  XT, XO1 or XX1 AXS. Ibis carbon wheel upgrades available as well.
*kit selection may change ETA of delivery, our team will let you know which kits have the fastest shipping lead times.

Check out the new 2022 Ibis Exie Complete. Review Spec, learn about popular upgrades and more!
Questions? Use the form below, chat, call 949-470-1099 or email CustomerService@BikeCo.com to chat with our sales team.

Contact us about pre-ordering this Ibis Exie for details on available ETAs, deposits, etc.

Upgrade to Ibis Carbon Rims for $849 or Ibis Carbon with i9 hubs for $1,399.

IN-BOUND, due to arrive Late Sept

Description

FOX Float 34 Factory Series Stepcast FIT 4 120mm

Ibis Exie Fork Travel Options

120mm Ibis Exie

The Exie is spec’d with a 120mm StepCast Fit 4 which gives the bike a nice balance between capacity and the ability to change directions. Staying in the StepCast travel range saves substantial weight compared to other fork options. Spec’d with a 44mm offset and Kabolt axle.

Air Spring & Volume Spacers

The FOX 34 provides riders a range of setup options using air spring as well as volume spacers.

Suggested sag is 15% for a firm feel and 20% for a plush fork.

Volume Spacers

The 120mm FOX 34 StepCast is factory spec’d with 3 volume spacers (bike manufacturers may or may not change this). The 120mm fork can carry a maximum of 6 volume spacers.

Do not install more volume spacers than the manufacturer advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

FOX 34 FIT 4 Rebound Controls

The FIT4 damper provides 10 clicks of low speed rebound.

Rebound opposes the air spring’s extension. The more PSI or volume spacers on your air spring the faster you will run your rebound (or you will use less clicks to slow the rebound).

Our team is here to help you dial in performance for your riding style and conditions.

FOX FIT4 Compression Controls

FOX FIT4 Compression Controls

The FOX FIT4 damper provides a three position switch – Open, Medium, Firm – as well as Low speed compression controls to fine tune support.

Compression circuits hydraulically damp (or slow) the fork’s input assisting the air spring in providing appropriate mid-stroke and bottom out feel.

Low Speed Compression helps provide mid-stroke support. This allows a bike to ride taller in the travel in cornering while resisting brake dive, rider weight shift and other slow shaft speed inputs.

The FIT4 fork has 22 clicks of low speed compression adjustment to modify the Open mode feel.

FOX Float Factory DPS

Air Spring & Volume Spacers

The Ibis Exie uses a 190 x 45mm shock, spec’d with the Fox Float Factory DPS.

SAG is adjusted by PSI – typically trail riding styles gravitate to 25-30% sag. This would measure about 13mm for a plush setup and 11mm for a more firm setup.

Volume Spacers

Volume spacing provides fine tuning options to support the air spring.

By changing to a larger volume spacer, thus reducing the volume, you increase the air spring’s ramp rate for improved bottom out support and pop.

Conversely smaller volume spacers produces a more linear feel as the air has more volume during shock compression per mm of travel.

Do not install more or larger volume spacers than the manufacturer advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

FOX Factory DPS Rebound Control

FOX FLOAT FACTORY DPS Rebound Controls

The DPS provides a rebound control with 11 clicks of adjustment.

Heavier riders will use more rebound control than lighter riders to slow the air spring’s return to neutral.

As your ground speeds increase it is common to allow your bike to rebound more quickly to prepare for the next terrain feature and avoid suspension packing from slow rebound setup.

Fox Factory DPS Compression Open Adjust and 3 position switch

FOX Float Factory DPS Compression Controls

The Fox Float Factory DPS shock provides two controls to help fine tune compression.

First is the blue 3 position switch which adjusts from Firm, Mid and Open. Also known as a “climb switch” the use of this is dependent on rider style, preference and terrain.

Fine tuning the low speed compression can be accomplished in the Open mode by adjusting the black dial located around the circumference of the blue 3 position switch.

3 settings are available with “1” being the most plus and “3” the most firm.

Ibis Exie XT Build – MSRP $7,999

The new Ibis Exie is a carbon fiber mountain bike frame made in the USA.  As such the USA made Exie is a relatively low volume frame so when you get one, you want to get it right!

All of the Exie  builds are highlighted with FOX Factory Suspension.

The stock fork offering is the FOX 34 Stepcast Fit 4 and the rear shock is spec’d with the FOX Float Factory DPS.

The Exie is available in XT, XO1 and XX1 AXS completes.

note: supply chain issues may result in frequent substitutions for similar parts at Ibis’ discretion.

Component Type


Fork:
Shock:
Front Hub:
Rear Hub:
Rims:
Spokes:
Nipples:
Front Tire:
Rear Tire:
Brakes:
Brake Rotors:
Crankset:
Bottom Bracket:
Rear Derailleur:
Shift Levers:
Cassette:
Chain:
Headset:
Grips:
Handlebars:
Stem:
Seatpost:
Saddle:

Exie XT Kit – MSRP $7,999


Fox Float StepCast 34 Factory Series 120mm Fit4 Remote, 29”, 110×15
Fox Float Factory Series, DPS with EVOL, 190 x 45
Ibis Logo Front Hub, 110×15, 32 Hole
Ibis Logo Rear Hub, 148×12, 32 Hole
Ibis S35 Alloy, 32 hole, 29″
Sapim Dlight Double Butted
Sapim 14G Alloy
Maxxis Recon Race 29″ x 2.4″ EXO / TR WT
Maxxis Recon Race 29″ x 2.4″ EXO / TR WT
Shimano XT M8100 2p
Shimano SM-RT86 180/160
Shimano XT M8100 24mm spindle, 30t Alloy Ring
Shimano XT MT800
Shimano XT M8100 Shadow Plus
Shimano XT M8100
Shimano XT 10-51
Shimano XT M8100
Cane Creek 40: IS41/IS52
Lizard Skin Charger
Ibis 800mm Hi Fi Bar
Industry Nine A318
Bike Yoke Revive Dropper
WTB Silverado 142

Ibis Exie XO1 Build – MSRP $9,199

The SRAM XO1 12sp drivetrain has been one of the most popular options on the market.

The Ibis Exie XO1 build features Shimano XT M8100 2 piston brakes, a great upgrade from SRAM options.

Component Type


Fork:
Shock:
Front Hub:
Rear Hub:
Rims:
Spokes:
Nipples:
Front Tire:
Rear Tire:
Brakes:
Brake Rotors:
Crankset:
Bottom Bracket:
Rear Derailleur:
Shift Levers:
Cassette:
Chain:
Headset:
Grips:
Handlebars:
Stem:
Seatpost:
Saddle:

Exie XO1 Kit – MSRP $9,199


Fox Float StepCast 34 Factory Series 120mm Fit4 Remote, 29”, 110×15
Fox Float Factory Series, DPS with EVOL, 190 x 45
Ibis Logo Front Hub, 110×15, 32 Hole
Ibis Logo Rear Hub, 148×12, 32 Hole
Ibis S35 Alloy, 32 hole, 29″
Sapim Dlight Double Butted
Sapim 14G Alloy
Maxxis Recon Race 29″ x 2.4″ EXO/ TR WT
Maxxis Recon Race 29″ x 2.4″ EXO/ TR WT
Shimano XT M8100 2 piston
Shimano SM-RT86 180/160
SRAM X01 Eagle DUB spindle, 30t Alloy Ring
SRAM DUB BSA
SRAM X01 Eagle
SRAM X01 Eagle
SRAM XG 1295 Eagle 10-52
SRAM X01 Eagle
Cane Creek 40: IS41/IS52
Lizard Skin Charger
Ibis 800mm Hi Fi Bar
Industry Nine A318
Bike Yoke Revive Dropper
WTB Silverado 142

Ibis Exie XX1 AXS Build – MSRP $12,799

Go no holds barred with the XX1 AXS Ibis Exie. This build includes i9 hubs and Ibis S28 carbon rims, XTR M9100 2 piston brakes, wireless SRAM AXS shifting and Reverb AXS dropper post.

Component Type


Fork:
Shock:
Front Hub:
Rear Hub:
Rims:
Spokes:
Nipples:
Front Tire:
Rear Tire:
Brakes:
Brake Rotors:
Crankset:
Bottom Bracket:
Rear Derailleur:
Shift Levers:
Cassette:
Chain:
Headset:
Grips:
Handlebars:
Stem:
Seatpost:
Saddle:

Ripley XX1 AXS Kit – MSRP $11,499


Fox Float StepCast 34 Factory Series 120mm Fit4 Remote, 29”, 110×15
Fox Float Factory Series, DPS with EVOL, 190 x 45
Industry Nine CL Front Hub, 110×15, 32 Hole
Industry Nine Hydra CL Rear Hub, 148×12, 32 Hole
Ibis S28 Carbon 32 hole, 29″
Sapim CX-Ray Butted
Sapim 14G Alloy
Maxxis Rekon Race 29″ x 2.4″ EXO/TR WT
Maxxis Rekon Race 29″ x 2.4″ EXO/TR WT
Shimano XTR M9100 2 piston
Shimano RT-MT900 180/160
SRAM XX1 Eagle DUB spindle, 30t Alloy Ring
SRAM DUB BSA
SRAM XX1 Eagle AXS
SRAM XX1 AXS 2 Button Eagle Triggers
SRAM XG 1299 Eagle 10-52
SRAM XX1 Eagle
Cane Creek 40: IS41/IS52
Lizard Skin Charger
Enve M6 Bar 780mm
Enve Mtn Stem 31.8mm
SRAM Reverb AXS Dropper
WTB Silverado 142
XX1 AXS battery & power pack charger

Popular Upgrades to the Ibis Exie Complete

There are a variety of popular upgrades or part swaps on the Ibis complete bikes. Flip through the tabs below to explore some of the most popular including Brakes, Tires, Chain Guides and Frame Protection.

Magura MT5 with HC Lever Upgrade

Brake Upgrades

Along with tires the most common upgrade or swap to a stock Ibis build is brakes.

Brakes are extremely important to your bike’s personality as well as your confidence on trail.

Finding brakes with the right modulation and power for your riding style allows you to further fine tune performance with rotor size.

Modulation:

Brake modulation is how the lever position relates to the amount of power at the caliper.

Brands like Magura and Hope offer great modulation. A slight pull on the lever will produce less pressure at the caliper and increases as lever throw continues. Magura riders can fine tune this even further with a variety of short or long brake levers to further modify the leverage ratio. In fact, Magura offers brake levers with adjustable modulation!

Shimano brakes have less modulation and the power tends to “come on” quicker. This isn’t necessarily good or bad – it’s just a personality.

Power:

Magura and Shimano offer similar levels of total power differing in personality more on modulation than max power or feel.

Hope brakes have a little less “bite” at full power but most riders are able to fine tune this by running a slightly larger rotor to increase both leverage and heat capacity.

Pricing / Value

Interested in updating the brakes but on a tight budget? Check out the Magura MT5. In many cases it’s available as a No-Cost upgrade. Cost conscious yes, light on performance or service life? Not a chance. The MT5 brake is the most popular offering here at BikeCo.com

Ibis Ripley Tire Upgrades from the Dissector

Popular MTB Tire Pairings

Let’s break this down into a couple sections: Tread and Sidewall Pairings.

Aggressive Setups:

Ultimate grip, ready to chew into any descent.
Assegai front, Assegai rear
Fairly popular.

Great front grip with a bit faster rolling rear tire for acceleration / climbing.
Assegai front, Minion DHR II (or DHF) rear
Most popular of aggressive setups.

Great front grip with a fast rolling rear.
Assegai front, Aggressor rear
Not as common

Great grip, with an open, medium height rear
Assegai front, Dissector rear
Not very common, but growing in popularity. The Dissector is a bit of an acquired taste locally with its shorter lugs being good for fast acceleration. Maxxis’ Dissector features larger gaps at a similar lug height to the Aggressor. The larger gaps are beneficially in looser conditions that require tires to “funnel” more dirt.

Moderately Aggressive Setups:

Proven, balanced, popular.
Minion DHF front, Minion DHR II rear
Very popular setup.
DHF front and rear or DHR II front and rear are both viable, the DHF tends to feel like the faster combo.

Fast, fun, great for loose over hard.
Minion DHF front, Aggressor rear
Another popular setup. As dirt conditions improve over the winter this is often a go replacing a Minion rear.

Minion DHF front, Dissector rear
Not seen often as the DHF is a tall lug with tightly spaced cornering lugs while the Dissector features shorter more spaced lugs, particularly along the cornering lugs.

Dissector front, Dissector rear
For riders who need the lug spacing increased for dirt conditions but don’t need lug height.
Not seen often, although in loamy conditions this would be a fast rolling setup where riders can trust dirt to help make up for the corner lug spacing.

Fast Rolling Setups:

Aggressor front, Aggressor rear
The Aggressor is a fast rolling tire with good cornering capacity. However the relatively large transition gap may create a front tire prone to slide until the cornering lugs engage.

Rekon front, Rekon Rear
If you’re looking for fast rolling the tightly spaced and low height lugs on the Rekon are hard to beat. The Rekon as a rear tire creates interesting match up issues for the front, but if you’re riding in conditions that the Rekon is comfortable it’s a ridable XC / Trail front tire.

Minion DHF front, Rekon Rear
This is going to be a more confident setup with a more aggressive front tire providing cornering power. The Minion DHF is a slower rolling option, but, as a front tire that’s not as much of a penalty. The tightly packed cornering lugs will better compliment the Rekon than say a lower lug option like the Dissector that has greater lug spacing.

 

Want to learn more about tires? Check out more about sidewall, tread pattern, cornering lugs, compounds and more (opens in new window)

Popular Enduro Chain Guides

One of the most common upgrades to the Ibis Ripmo is adding a chain guide.

A variety of options are available depending on your riding needs.

The Wolf Tooth Gnarwolf is a great upper guide as is the OneUp option.

OneUp goes a step further with the Guide + Bash or, for riders who don’t need or want the upper guide, simply a lower bash to protect the chain ring and bottom bracket area.

The lower bash only is a popular option with oval chain ring setups that can be complex to pair with upper guides.

RideWrap Frame Protection Installation

RideWrap Frame Protection

A popular upgrade for any mountain bike, we offer two options of RideWrap Frame protection.

The RideWrap Tailored Kit covers the majority of your frame based on individual model size and shape. This is a $95.00 addition. We will install the Tailored kit for an additional $250.00 labor at time of initial build.

RideWrap’s Covered Kit protects the high wear areas such as downtube, top tube, etc. Custom trimming of the stock Covered Kit helps with fitment depending on model and size. The Covered Kit is $65.00 and installation is $150.00 at time of build.

Installing RideWrap isn’t particularly hard – but it is time consuming. Thinking about doing the labor yourself? Awesome! Check out a quick video on the installation process below.

Return to Top of Page

Contact Me About This Product!
  • Please contact me by:

  • Question on availability? Spec? Compatibility?
    Our team will be in contact within 24 hours!


  • Hidden
  • Hidden
  • Hidden
  • This field is for validation purposes and should be left unchanged.

Additional information

Complete Wheel Size

29"

Complete Wheel Size Ibis

29"

Ibis Complete Model

Exie

In-Stock In-Bound Models

Ibis Exie

Status

In-Bound

In Bound by Brand

Ibis

In Bound Frame or Complete

Completes

In Bound by Size

Medium

In Bound by Wheel Size

29"