Ibis Exie
Frame Only

$4,499.00

Ibis Exie Frame

Contact us today about your Ibis Exie X01 frame! Whether you’re looking for the perfect custom spec, or just need to swap your current rig for  that USA made Exie frame BikeCo.com has you covered.

Available in Cheat-O Orange or Bug Zapper Blue.

 

 

ETA may vary based on selection, Contact our team for details!

Categories: , , Tags: , ,

Description

Questions? Use the form below, chat, call 949-470-1099 or email CustomerService@BikeCo.com to chat with our sales team.

Use our interactive mtb geo comparison below to understand and review the fit of your Ibis Exie. Compare sizes as well as how the Exie measures up to other models!

Ibis Exie Frame Cheat-O-Orange Detail

Handmade in California the Ibis Exie gives MTB riders access to unbeatable quality and ride in a USA made carbon MTB frame.

Detail images of Ibis Exie Frame (28/40 shown from original launch!)

FOX Float Factory DPS

Air Spring & Volume Spacers

The Ibis Exie uses a 190 x 45mm shock, spec’d with the Fox Float Factory DPS.

SAG is adjusted by PSI – typically trail riding styles gravitate to 25-30% sag. This would measure about 13mm for a plush setup and 11mm for a more firm setup.

Volume Spacers

Volume spacing provides fine tuning options to support the air spring.

By changing to a larger volume spacer, thus reducing the volume, you increase the air spring’s ramp rate for improved bottom out support and pop.

Conversely smaller volume spacers produces a more linear feel as the air has more volume during shock compression per mm of travel.

Do not install more or larger volume spacers than the manufacturer advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

FOX Factory DPS Rebound Control

FOX FLOAT FACTORY DPS Rebound Controls

The DPS provides a rebound control with 11 clicks of adjustment.

Heavier riders will use more rebound control than lighter riders to slow the air spring’s return to neutral.

As your ground speeds increase it is common to allow your bike to rebound more quickly to prepare for the next terrain feature and avoid suspension packing from slow rebound setup.

Fox Factory DPS Compression Open Adjust and 3 position switch

FOX Float Factory DPS Compression Controls

The Fox Float Factory DPS shock provides two controls to help fine tune compression.

First is the blue 3 position switch which adjusts from Firm, Mid and Open. Also known as a “climb switch” the use of this is dependent on rider style, preference and terrain.

Fine tuning the low speed compression can be accomplished in the Open mode by adjusting the black dial located around the circumference of the blue 3 position switch.

3 settings are available with “1” being the most plus and “3” the most firm.

Compare Ibis Exie Geometry

Open the tab to the right to display our interactive mtb geometry comparison.

You can compare bottom bracket, chainstay, wheelbase, headtube angle, trail, reach and stack as well as learn more about rider’s reach and rider’s stack!

Popular Upgrades to the Ibis Exie Complete

There are a variety of popular upgrades or part swaps on the Ibis complete bikes. Flip through the tabs below to explore some of the most popular including Brakes, Tires, Chain Guides and Frame Protection.

Magura MT5 with HC Lever Upgrade

Brake Upgrades

Along with tires the most common upgrade or swap to a stock Ibis build is brakes.

Brakes are extremely important to your bike’s personality as well as your confidence on trail.

Finding brakes with the right modulation and power for your riding style allows you to further fine tune performance with rotor size.

Modulation:

Brake modulation is how the lever position relates to the amount of power at the caliper.

Brands like Magura and Hope offer great modulation. A slight pull on the lever will produce less pressure at the caliper and increases as lever throw continues. Magura riders can fine tune this even further with a variety of short or long brake levers to further modify the leverage ratio. In fact, Magura offers brake levers with adjustable modulation!

Shimano brakes have less modulation and the power tends to “come on” quicker. This isn’t necessarily good or bad – it’s just a personality.

Power:

Magura and Shimano offer similar levels of total power differing in personality more on modulation than max power or feel.

Hope brakes have a little less “bite” at full power but most riders are able to fine tune this by running a slightly larger rotor to increase both leverage and heat capacity.

Pricing / Value

Interested in updating the brakes but on a tight budget? Check out the Magura MT5. In many cases it’s available as a No-Cost upgrade. Cost conscious yes, light on performance or service life? Not a chance. The MT5 brake is the most popular offering here at BikeCo.com

Ibis Ripley Tire Upgrades from the Dissector

Popular MTB Tire Pairings

Let’s break this down into a couple sections: Tread and Sidewall Pairings.

Aggressive Setups:

Ultimate grip, ready to chew into any descent.
Assegai front, Assegai rear
Fairly popular.

Great front grip with a bit faster rolling rear tire for acceleration / climbing.
Assegai front, Minion DHR II (or DHF) rear
Most popular of aggressive setups.

Great front grip with a fast rolling rear.
Assegai front, Aggressor rear
Not as common

Great grip, with an open, medium height rear
Assegai front, Dissector rear
Not very common, but growing in popularity. The Dissector is a bit of an acquired taste locally with its shorter lugs being good for fast acceleration. Maxxis’ Dissector features larger gaps at a similar lug height to the Aggressor. The larger gaps are beneficially in looser conditions that require tires to “funnel” more dirt.

Moderately Aggressive Setups:

Proven, balanced, popular.
Minion DHF front, Minion DHR II rear
Very popular setup.
DHF front and rear or DHR II front and rear are both viable, the DHF tends to feel like the faster combo.

Fast, fun, great for loose over hard.
Minion DHF front, Aggressor rear
Another popular setup. As dirt conditions improve over the winter this is often a go replacing a Minion rear.

Minion DHF front, Dissector rear
Not seen often as the DHF is a tall lug with tightly spaced cornering lugs while the Dissector features shorter more spaced lugs, particularly along the cornering lugs.

Dissector front, Dissector rear
For riders who need the lug spacing increased for dirt conditions but don’t need lug height.
Not seen often, although in loamy conditions this would be a fast rolling setup where riders can trust dirt to help make up for the corner lug spacing.

Fast Rolling Setups:

Aggressor front, Aggressor rear
The Aggressor is a fast rolling tire with good cornering capacity. However the relatively large transition gap may create a front tire prone to slide until the cornering lugs engage.

Rekon front, Rekon Rear
If you’re looking for fast rolling the tightly spaced and low height lugs on the Rekon are hard to beat. The Rekon as a rear tire creates interesting match up issues for the front, but if you’re riding in conditions that the Rekon is comfortable it’s a ridable XC / Trail front tire.

Minion DHF front, Rekon Rear
This is going to be a more confident setup with a more aggressive front tire providing cornering power. The Minion DHF is a slower rolling option, but, as a front tire that’s not as much of a penalty. The tightly packed cornering lugs will better compliment the Rekon than say a lower lug option like the Dissector that has greater lug spacing.

 

Want to learn more about tires? Check out more about sidewall, tread pattern, cornering lugs, compounds and more (opens in new window)

Popular Enduro Chain Guides

One of the most common upgrades to the Ibis Ripmo is adding a chain guide.

A variety of options are available depending on your riding needs.

The Wolf Tooth Gnarwolf is a great upper guide as is the OneUp option.

OneUp goes a step further with the Guide + Bash or, for riders who don’t need or want the upper guide, simply a lower bash to protect the chain ring and bottom bracket area.

The lower bash only is a popular option with oval chain ring setups that can be complex to pair with upper guides.

RideWrap Frame Protection Installation

RideWrap Frame Protection

A popular upgrade for any mountain bike, we offer two options of RideWrap Frame protection.

The RideWrap Tailored Kit covers the majority of your frame based on individual model size and shape. This is a $95.00 addition. We will install the Tailored kit for an additional $250.00 labor at time of initial build.

RideWrap’s Covered Kit protects the high wear areas such as downtube, top tube, etc. Custom trimming of the stock Covered Kit helps with fitment depending on model and size. The Covered Kit is $65.00 and installation is $150.00 at time of build.

Installing RideWrap isn’t particularly hard – but it is time consuming. Thinking about doing the labor yourself? Awesome! Check out a quick video on the installation process below.

Return to Top of Page

Contact Me About This Product!
  • Please contact me by:

  • Question on availability? Spec? Compatibility?
    Our team will be in contact within 24 hours!


  • Hidden
  • Hidden
  • Hidden
  • This field is for validation purposes and should be left unchanged.

Additional information

Bikes by Brand

Ibis

Bikes by Model

Exie

Bikes by Size

Extra Large, Large, Medium, Small

Bikes by Wheel Size

29"

Bikes MTB or eMTB

MTB