Ripmo V2S Frame
Bruce Banner


AVAILABLE: Secure This Bike - Updated 03/31/23

SKU: Ripmo V2S M Olive Frame Categories: , , , , , , , Tags: , ,


Ibis Ripmo V2S Frame Only in Bruce Banner Green

Click on these tabs to learn more about the purchasing process from BikeCo.com

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

Ibis Ripmo V2s Frame Medium in Bruce Banner Green

Check out more details about the Ibis Ripmo V2S Frame in Medium Bruce Banner Green here.

Learn about 160 and 170mm fork options, Air vs. Coil, the SRAM UDH 55mm Chainline and more!

Questions? Reach out to our team today.

Ibis Ripmo Frame in EnduroCell (Black/Charcoal) and Bruce Banner (Green).

Like all Ibis bikes the colors look great here and EVEN BETTER in natural UV light…

What’s the S in Ripmo V2S?

Swingarm. Ibis’ new swingarm features some notable updates.

SRAM UDH (Universal Derailleur Hanger: Consolidating SKUs means you can get a UDH when you need it at home or on a trip.

Changes that allow the revised 55mm chain line which utilizes a slightly wider rear end providing a stiffer chainstay for improved traction and tracking.

Ibis Top Tier Carbon & FOX Factory Suspension

Across the entire Ripmo V2S build lineup Ibis features their best carbon fiber and Factory suspension.

One of the things that sets Ibis apart from other brands is their singular use of a top tier carbon fiber across their entire carbon lineup. This carbon is vibrant and proven in the harshest riding conditions on the EWS circuit. Top tier carbon will retain a more vibrant feel longer into its service life.

The FOX Factory suspension is more than the slippery Kashima coat – Factory Suspension also features the top of the line dampers for the widest range of adjustment.

FOX Factory Float X2 Shock

Click through these tabs to learn more about the Ibis Ripmo V2S’ Fox Factory Float X2 rear shock.

FOX Factory Float X2 Air Can Controls

Air Spring & Volume Spacers

The Ibis Ripmo uses a 210 x 55mm shock.

The spec’d Fox Float Factory X2 is the most popular based on its wide variety of setup options.

SAG is adjusted by PSI – typically Enduro riding styles gravitate to 25-30% sag. This would measure about 17mm for a plush setup.

Volume Spacers

Volume spacing provides fine tuning options to support the air spring.

By adding volume spacers, thus reducing the volume, you increase the air spring’s ramp rate for improved bottom out support and pop.

Conversely removing volume spacers produces a more linear feel as the air has more volume during shock compression per mm of travel.

Do not install more volume spacers than the FOX advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

FOX Factory Float X2 Rebound Controls

FOX FLOAT X2 Rebound Controls

The X2 rear shock provides both Low (LSR) and High (HSR) rebound controls.

The addition of the High Speed or HSR control provides increased rebound control to account for the higher PSI produced by aggressive or heavier riders.

Typically riders will adjust LSR, Low Speed Rebound, to suit riding style and taste and refer to FOX’s guide for the appropriate HSR, High Speed Rebound, pairing.

Low Speed Rebound is located near the Compression Controls and 2 position switch. High Speed Rebound adjustments are made on the opposite end of the shock near the eyelet.

FOX Factory Float X2 Compression Controls

FOX X2 Compression Controls

The FOX X2 provides Low and High speed compression controls to fine tune support as well as a 2 position OPEN or FIRM switch..

Compression circuits hydraulically damp (or slow) the fork’s input assisting the air spring in providing appropriate mid-stroke and bottom out feel.

Low Speed Compression helps provide mid-stroke support. This allows a bike to ride taller in the travel in cornering while resisting brake dive, rider weight shift and other slow shaft speed inputs.

High Speed Compression works to fine tune bottom out feel as well as other high shaft speed inputs also known as square edge bumps. Example: if you sprint straight into a curb you’re likely to engage the High Speed Compression even if you’re not using full travel. This is due to the speed of the shaft moving oil to compensate for the hit.

The FOX X2 provides 16 clicks of Low Speed Compression adjustment as well as 8 clicks of High Speed Compression controls.

Ibis Ripmo V2S: Air vs. Coil

Debating air versus coil on your new Ibis Ripmo V2S?  Let’s look at the differences in the spring concepts.

Coil Ripmo

Generally coil shocks are sought after for being more plush on the initial stroke and more linear through the travel. “Linear” means less progressive, or less able to resist bottom out. Now, some of this can be tuned with compression settings on the damper, however, it will never have the same progressive feel as an air shock.

Getting the right coil for you usage is critical for the best performance. Typically riders will purchase two of the less expensive coil springs and decide if they prefer the softer spring with more preload spun into the spring or if the “heavier” spring with less preload is their preference. There is actual a difference in progressiveness with these two approaches while maintaining a cross over sag spring rate. In short, if you’re looking at coils and not 100% sure what you need chat with our team – and save on that titanium ultra light spring while you fine tune with the cheaper steel options!

Air Ripmo

Air shocks are mechanically more progressive in nature thanks to the properties of compressing air. Riders who want less ramp rate, or less progressive suspension can remove volume spacers thus increasing the air volume. Adding volume spacers diminishes the volume available to compress which leads to the PSI increasing at each mm of travel – increasing the ramp rate or progression of the suspension.

Shocks like the FOX X2 are typically very supple mimicking coil performance with a much wider range of adjustabilty to fine tune performance.

Most riders will gravitate to the air spring option for the range of adjustability. With the FOX Float X2 riders can reduce the compression settings to produce a more linear feel or run a more standard setup for a bit more “pop” and bottom out resistance.

Questions? No problem. Chat with our team and we’ll help you dial in your dream build.

Ibis Ripmo Fork Travel Options

160mm Ibis Ripmo V2S

The Ripmo is spec’d with a 160mm FOX 38. This provides the bike with it’s stock 64.9 degree headtube angle and 341mm bottom bracket height.

Riders looking for a little more aggressive setup may investigate the 170mm option.

170mm Ibis Ripmo V2S

Perhaps more than the additional 6% of travel the 10mm adds are the geometry modifications. Raising the front of the Ripmo will slacken the headtube, increase the trail measurement and slightly lift the bottom bracket.

These are popular shifts for riders attacking the steepest, burliest terrain.

Wondering which is right for you? Chat with our team today and we’ll help you define which riders benefit from which travel setup.

BikeCo Exclusive: Pro Tune Suspension

There are a lot of reasons to shop at The Bike Company (BikeCo.com). Some are: Unmatched attention to detail. Incredible after sales setup follow up. Pro Tune Suspension.

Our team works with the FOX fork and shock lineup to take the already great FOX suspension to the next level. Working with our team of suspension tuners we will narrow the FOX performance window based on your size, riding style, terrain, ground speeds, aggression, goals and chassis.

What’s it mean to narrow the performance window? Well, each click is more precise. The fluid is hand picked for you. The bleed is more precise.

On trail your suspension will be more plush while maintaining the support and progression you need to really attack the trail.

For racers our tuned suspension subtracts seconds from your run. For pleasure riders it improves the traction and feel allowing you to progress quicker in your riding.

Talk to our team about the advantages of BikeCo Pro Tunes today.

Ibis Ripmo Frame Only

MSRP: $3,699

Ibis Ripmo Frame Details:

Wheel Size: 29” / up to 2.5″ tires
Front Travel: 160mm
Rear Travel: 147mm
Shock Specs: 210 x 55mm
Boost Axles: 148mm rear / 110mm front
Seatpost Diameter: 31.6mm
Rear Brake: 180mm Post mount / 203mm max rotor
Bottom Bracket: Threaded (73mm BSA)
Chainline: 55mm chainline, 182mm Q Factor
Derailleur Hanger: SRAM UDH
ISCG 05: Tab Mount
Headset: ZS44 upper / ZS56 lower
Sizes: S / M / L / XL
Frame Warranty: 7 years


Here’s some great data from Ibis’ site about the SRAM UDH and 55mm chainline:


Bikes with a Sram UDH derailleur hanger require a crankset capable of achieving a 55mm chainline.

55mm chainline cranksets include:

Sram Dub Wide Cranksets.
Shimano 120 Series Cranksets.

A variety of other manufacturers offer 55mm chainline cranksets. Verify with your preferred crankset manufacturer before purchasing and installing.

Will a 52mm chainline crankset work on my new 55mm chainline bike?

While 52mm chainline cranksets with 28T-30T chainrings may clear the frame, it’s best to utilize a crankset capable of achieving the corresponding chainline to your frame. This will ensure the best shift quality and allow the use of larger chain rings. Always double check chainring clearance and fitment prior to riding.

Compare Ibis Ripmo Geometry

Open the tab to the right to display our interactive mtb geometry comparison.

You can compare bottom bracket, chainstay, wheelbase, headtube angle, trail, reach and stack as well as learn more about rider’s reach and rider’s stack!

Ripmo V2S: Comparative Bikes

What else is on your short list when shopping the Ripmo V2S?

Well, the Ripmo has cutting edge DW Suspension with 147mm of rear travel and can be setup with either a 160mm or a 170mm fork. It is a proven EWS level bike while being acknowledged as one of the most confident and comfortable enduro bikes for pleasure riding.

Currently the list of bikes that are directly comparable to the Ripmo V2S carbon would be the Yeti SB150 and Mondraker FOXY. Both available from BikeCo.com.

For riders looking at a more entry level price point Ibis’ aluminum Ripmo AF is a great option.

If you’re shopping a slightly smaller chassis the Ibis Ripley, Yeti SB130 and Mondraker Raze are worth review.

Check out more bikes on our Bikes & Frames page or Shop In-Stock and In-Production Ripmos Below

Return to Top of Page

Shop Ibis Ripmo Frames

Shop In-Stock and Available Ibis Ripmo V2S Frames at BikeCo.com below, or scroll down for Ripmo Completes

Shop Ibis Ripmo Completes

Glance through our In-Stock and Available Ripmo Completes below – or jump over to our In-Stock page to easily filter to the perfect bike for you!

Questions on a Ripmo Frame?

Let’s get you dialed in! Reach out and our team will be in contact shortly.

Contact Me Regarding the Ripmo V2S

Contact Me About The Ripmo V2S

  • Please contact me by:

  • Question on sizing? No problem we can dial you in.
  • Question on availability? Spec? Compatibility?
    Our team will be in contact ASAP!

  • Hidden
  • Hidden
  • Hidden
  • This field is for validation purposes and should be left unchanged.

Additional information

Ibis Level: Model
Yeti by Size
Mondraker by Model
Nukeproof Status
Mondraker by Type
Yeti by Type
Yeti by Model
Mondraker Status
Yeti Status
Yeti Level: Model


Mondraker by Size
Mondraker Level: Model
Ibis by Size


Ibis Status


Bikes Status



Bruce Banner

Bikes by Wheel Size


Ibis by Model


Bikes MTB or eMTB


Bikes by Size


Bikes by Brand


Bikes by Model