TRP 2 Piece Slotted 203mm Rotor

$74.99

TRP 2 Piece Slotted Rotor 203mm, 6 bolt, 2.3mm

compatible with TRP brakes that accommodate the wider 2.3mm rotors

203mm TRP 2.3mm Rotor, 6 bolt, 2 piece part numbers:

vendor part #: ABRT000107
EAN: 4717592029208

TR203-42

 

In-Stock: updated 03/26/24. Ships same or next business day!

SKU: BPTRP0200 203MM Categories: , , Tags: , ,

Description

TRP rotor 2 Piece Slotted 203mm part number TR203-42 ABRT000107

TRP 2 Piece 203mm Rotor

Designed for maximum heat capacity and performance the TRP 2 Piece 203mm rotor is 2.3mm thick (ensure your TRP brakes are designed for the wider rotor). The thicker rotor is capable of absorbing more abuse while remaining true and functional.

203mm rotor weight: 239g

vendor part #: ABRT000107
EAN: 4717592029208

TRP203-42


Finish your brake project choosing the best new brakes and adapters from BikeCo.com.


Learn more about Rotor Sizing, Wear & Replacement below.


MTB Rotor Sizing

Choosing the right size rotor is important to your riding. Too little rotor, and well, you’re not going to stop! Too much rotor can create a touchy feeling brake.

Things to consider when purchasing rotors are heat capacity and leverage.

Heat capacity is a function of both the model’s shape and construction as well as its diameter. Rotors with more cutouts will be lighter but sacrifice braking surface and material. This will increase heat saturation and decrease overall power. Some of this can be changed going to a larger diameter rotor. A larger diameter rotor will have more material (which slows heat saturation) as well as increased leverage on the wheel.

Increasing rotor size (leverage) gives your brakes added mechanical advantage for greater stopping power. If you go too large your brakes may start to feel “touchy”.

As four piston brakes continue to gain popularity riders are able to consider slightly smaller rotors to improve modulation without sacrificing total power.

Questions on what size is ideal? No problem. Chat with our team to dial in your brake performance for your riding style.

 

MTB Rotor Wear & Replacement

Rotor service life varies dependent on many reasons. Here are some of the more typical issues.

Minimum Rotor Thickness

11 12 18 Magura Shimano SRAM Rotor Wear Limits

 

Magura rotors minimum thickness is 1.8mm. Less than 1.8mm is worn.
Because of the greater thickness on Magura rotors when new and worn it is suggested to pair Magura brakes with Magura rotors.

TRP 2.3mm rotors are considered worn at 1.9mm
TRP 1.8 mm rotors are considered worn at 1.55mm

SRAM & Shimano rotors minimum thickness is 1.5mm. Less than 1.5mm is worn.

Shimano Ice-Tech rotors should be replaced if any aluminum surface is visible.

When to replace rotors

To maximize your purchase it’s best to install new rotors with new brake pads. (Typically rotors will last 2-4 sets of brake pads.)

Rotors & pads wear in together and often will “take shape” to each other.

The image below illustrates some common wear issues for rotors and pads. When the rotor or pads have taken a shape out of parallel your brake performance is drastically diminished.

 

11 12 18 Pad Rotor Wear Issues

 

Reviewing the image above on the far left you see a rotor with chamfered edges. The rotor to the right has taken a concave shape (rotors can also take convex shapes but it’s less frequent).

Installing new brake pads on either of these rotors is going to be problematic.

 

Contact issues between new and old pats and rotors

 

As you see above worn pads or rotors with new partners can create contact point issues.

When the contact area decreases it will superheat the remaining contact points. This can lead to permanent damage to pads, rotor, or both.

This is also the reason it can feel like you’re down power when you replace components individually. It’s best to replace rotors when you replace brake pads. Typically every 3-4 set of pads will require rotors. Depending on your riding conditions and service this may change.

MTB Brake Pad Wear Limits

11 12 18 Magura Shimano SRAM Brake Pad Wear Limits

Magura pads measuring less than 2.5mm, pad & backing plate, need to be replaced.

SRAM pads measuring less than 3.0mm, pad & backing plate, need to be replaced.

Shimano pads should be replaced when the pad measures less than 0.5mm.

These measurements are maximum wear limits. Often performance, particularly heat capacity will degrade well prior to these limits. If you have a trip, race or plan on a really steep day that’s going to be hard on your brakes it is a good idea to refresh the pads well before the maximum wear limits.


Return to Top of Page

Contact Me Regarding This Product

  • Please contact me by:

  • Question on availability? Spec? Compatibility?
    Our team will be in contact within 24 hours!


  • Hidden
  • Hidden
  • Hidden
  • This field is for validation purposes and should be left unchanged.

Additional information

Sale Or Take Off
MPN
UPC
Color
Size
Shop by Brand

TRP

Brand

TRP

Brakes Brand

TRP

Rotors Brand

TRP

Rotors Size

203