Yeti SB100 Frame Kit Custom Builder, Turq Carbon

Yeti SB100 Frame Kit Custom Builder, Turq Carbon

Looking for the ultimate Yeti SB100 build? Spec the best suspension, headset and adjustable seat post on your custom SB100 Frame Kit. Use BikeCo’s other custom modules to spec your bike with the best performing products on the market. Add the modules to your cart for a total build out and go blast your favorite trails.


Out of stock

  • Description
  • Yeti SB100 Geometry & Features
  • BikeCo Pro Tunes
  • Pricing, Incentives, Upgrades & Questions


Oops – This page has been rebuilt into our Yeti SB100 Custom Complete Builder! Follow the link to spec your ultimate Yeti SB100.

Yeti SB4.5 Frame Kit, 114mm Travel Switch Infinity Suspension, 29″

BikeCo offers riders the ability to spec the ultimate personalized builds with our Yeti SB100 Frame Kit Builder. All of our Yeti Custom Frame Kit Builders feature the top tier Turq carbon fiber.

The Yeti SB100 frame is designed for riders who enjoy both all day XC adventures and high speed trail rips. Pairing cutting edge geometry with the trail proven Switch Infinity produces a bike that is nimble, quick on acceleration and confident on the trails. Additionally riders will find the Yeti SB100 offers a comfortable, centered riding position in a wide range of terrain. Well balanced front and rear the SB100 frame allows confident higher corner entry speed besides its’ explosive acceleration under power. Undoubtedly the SB100 is on trail rider’s short list for review – if you have questions on the SB100’s capacity or personality reach out to our expert staff for clarification.

BikeCo Frame Prep

All frame, frame kit as well as complete purchases receive a thorough BikeCo Frame Prep. Riding a bike without appropriate bearing retention, torque and alignment is hard on components. As a result “loose” bikes not only make noise but will also wear prematurely. BikeCo’s expert mechanics go through each chassis ensuring that suspension, bearings, and hardware are setup for maximum performance and longevity. Many home builders have a full frame assembly completed by BikeCo mechanics to ensure the best setup, in brief headsets, bottom brackets, suspension, derailleur hangers, etc are gone through piece by piece.

Need some inspiration? Check out the Yeti SB100 Factory Builds


BikeCo offers the Yeti SB100 Frame Kit with the best components in MTB:

Rear Shock:
Fox Factory DPS

Pro Tune Fox Fact. DPS +$160.00
Fox Factory DPX2 +$120.00
Pro Tune Fox Fact. DPX2 +$280.00

No Fork
Fox Perf. Elite Fit 4
Pro Tune Fox Perf. Elite Fit 4 +$979.00
Fox Factory Fit 4 +$879.00
Pro Tune Fox Fact. Fit 4 +$1,059.00

Headset Options:
Cane Creek 40 Black
Chris King (colors)
Black, Matte Jet, Matte Slate, Mango, Navy, Red, Silver, Turquoise

Seatpost Options:
Fox Factory Transfer 150mm, 125mm, 100mm w/ WT Remote +$409.00
Fox Performance Transfer 150mm, 125mm, 100mm w/ WT Remote +$359.00

More details on BikeCo Pro Tune Suspension here!


From Yeti’s Site:

This is what we can do with short travel and our newly configured Switch Infinity. It transcends the weight-weenie, uphill only models and replaces it with a precision riding bike. If some people assume it’s a downhiller’s XC bike, whatever… Call it what you want. For us, it’s simply the bike we always wanted to build. The SB100.

We redesigned the Switch Infinity specifically for 100mm of travel – it’s lighter and tucks neatly behind the seat tube. There is no performance compromise with the compact Switch mechanism. It utilizes the same proven Fox Racing bushing, seals, and Kashima stanchions.

The new Switch Infinity design allows space for an uninterrupted seat tube, accommodating longer dropper seatposts and a water bottle mount in the front triangle.

Instead of chasing featherweight on the build, we spec’d the bike as we tested it – Fox Transfer post, Maxxis 2.3 tires, and 180mm front rotor. It’s still light, but also right. Our pro rider, Geoff Kabush, will be defending his BC Bike Race title on this rig.


Travel:  3.9” (100MM)
Frame Weight:  5.5 LBS (2.50 KG)
Wheel Size:  29”
Frame Size:  SM, MD, LG, XL
R.Shock:  190mm x 37.5mm
B.Bracket:  PF92
R.Wheel:  148mm X 12mm (BOOST)
F.Derailleur:  N/A
Seatpost:  30.9mm


The SB100 rides bigger than the travel suggests.

Switch Infinity suspension makes our bikes efficient on the ups, but even more capable on the downs because you can utilize all the travel without ramping up and things getting weird. This allows us to spec longer travel forks up front. More travel, more fun.

Yeti SB100 Custom Frame Kit Options:

Rear Shock:

Fox Factory DPS: Fox’s premium inline shock features great updates this year. A lighter, one-piece EVOL air sleeve improves responsiveness and sensitivity while updated valve designs improved both rebound and compression flow. The DPS shock offers 3 positions – Open, Medium and Firm – to match any terrain.

Fox Factory DPX2: Sharing design influence from the more aggressive X2 the DPX2 is designed as the ultimate trail shock. Three modes – Open, Medium & Firm – give riders options to personalize performance across a variety of terrain. This is a notable improvement from the previous Float X option and offers more heat capacity than the single chamber body options.

BikeCo Pro Tune: Whether you’re a seasoned rider or completely new to the sport improved suspension performance means a better performing, and more fun, bike. Check out the Pro Tune tab for more details.


BikeCo works with the Fox lineup for many reasons – in particular, they work awesome and are incredibly reliable for our clients. Since the Alchemy runs a 160mm Enduro fork let’s define some of the options available in the Fox Float 36 lineup.

There are four levels of Fox forks available, excluding OEM variations.
Rhythm & Performance (Grip Damper)
Performance Elite (HSC/LSC or Fit 4 Damper)
Factory (HSC/LSC or Fit 4 damper)

In this kit we offer the Performance Elite and Factory options.

Performance Elite has the same dampers as the Factory offerings without the Kashima coating (Performance has black stanchions).
Factory forks have the familiar Kashima coating on the stanchions for maximum performance and longevity.

Fit 4 Dampers feature a 3 mode compression switch – Open, Medium , Firm – and adjustable compression control in the Open setting. Fit 4 forks feature a more “trail” feel than their RC2 cousins while offering a quick “lockout” for riders who desire the firmest offering to climb the steepest / longest trails.

Looking for even more performance from your suspension?

At this point it’s time to Pro Tune your Fox fork and rear shock for the most personalized setup available. Flip to the Pro Tune tab for more info and to fill out your bio for our suspension techs.

The Ripley LS can run a 140mm or 130mm fork setup. Most rider’s prefer the 140mm for a bit more forgiveness and its aggressive personality. If you’re looking for a bit steeper headtube angle the 130mm may be for you. Contact our expert sales staff if you’re not sure which is the best setup for your needs.


The Cane Creek 40 is a popular headset balancing budget and performance.

If you want to install a headset, once, and call it done – if you’re looking for a bit of flare on your build – if you want the best, American made, bearing around then Chris King is for you. It’s really about that simple…



This season the Fox Transfer post (Performance = black, Factory = Kashima coat) paired to the Wolf Tooth ReMote has been the absolute go-to setup. Great reliability, a variety of sizing options, incredible ergonomics in other words, it’s an easy choice.


*Yeti frames and completes are only available for in-store pickup.*

Yeti Cycles SB100 Geo

Yeti Cycles SB100 Geometry

YETI SB100 Frame Geometry

*measurements in inches

120mm Fork Small Medium Large X-Large

Seat Tube Length









Toptube Length B 22.7 23.8 24.8 25.9
Headtube Angle C 67.8 67.8 67.8 67.8
Eff. Seat Tube Angle D 74.3 74.2 74.1 74
Chainstay Length E 17.2 17.2 17.2 17.2
Wheelbase F 44.2 45.3 46.4 47.5
Estimated BB Height G 13.1 13.1 13.1 13.1
Standover H 28.5 28.5 28.5 28.5
Headtube Length I 3.8 4.2 4.9 5.7
Axle to Crown J 20.9 20.9 20.9 20.9
Offset K 1.7 1.7 1.7 1.7
Stack L 23.7 24.1 24.7 25.5
Reach M 16 17 17.8 18.6
Front Center N 27 28.1 29.1 30.2





5’3” -5’7”



5’7” – 5’11”







Maximize your suspension’s performance with BikeCo Pro Tunes

BikeCo offers proprietary Pro Tune services on the majority of Fox forks and rear shocks.

Fox Suspension is the pinnacle of performance, reliability, and longevity in our industry. Stock Fox suspension comes out of the box with a fairly aggressive tune – which is terrific for powerful, strong, aggressive riders with high ground speeds. Sounds like their World Cup DH and Enduro riders, right?

Pro Tune services calibrate the incredible performance of Fox suspension into a narrower band personalized to your riding specifics.

Utilizing a combination of proprietary lube oils, improved upper to lower fork fit, shim stack configuration, updated oil flow, unmatched bleed quality, and a few other trade secrets BikeCo Pro Tunes improve tracking, small bump compliance, minimize brake dive, run cooler (equating to more predictable performance from top to bottom of your descent), operates comfortably in a wide range of temperature (we test from freezing to 100 degrees), improves oil circulation, extends service intervals and more.

The most important advantage of Pro Tune suspension? Whether you are new to the sport or an experienced pro: suspension that works will let you ride more confidently. You will ride faster and have more fun with BikeCo Pro Tune Suspension.

To ensure that your suspension is dialed in our staff will review your riding experience, aspirations, ground speeds, size (height and weight) as well as specific chassis. BikeCo stands behind our Pro Tune service with a 30 day retune service if you feel that your particular riding requires a shift in tuning. BikeCo also offers discounted disposition retunes as your skillset progress if required.

After the Pro Tune your suspension only requires standard levels of maintenance in the future. To maintain the best performance BikeCo recommends sending the suspension in (we use proprietary lube oils, have specific bleed techniques, etc) although standard Fox oils can be used. Standard lubes will compromise some of the finite tune but with the other Pro Tune modifications a standard lube shock will still out perform stock.

Ready to go? Fill out the online form below and we will get you dialed in.
Have a few more questions? Give us a call or send us a message and our expert staff is happy to work with you!

Pro Tune Form

*required fields

Pricing, Incentives, Upgrades & Questions – BikeCo has you covered

Chat with our expert sales staff for the best market incentives, performance hop ups, setup tips and more!

Chris and Landon lead the BikeCo sales team and are always up to date with the best deals for clients at all levels and across all riding styles. Years of experience on trail with a variety of the best frames, suspension, wheels, tires and accessories means the staff at BikeCo is able to help you define which components will best compliment your riding (conversely we can help steer you away from problematic gear as well).

Reach out via email - Chris is available & Landon, chat, call - 949-470-1099 or 888-697-6717 or use this quick online form to start the process with the leaders in sport to pro level MTB – the experts from The Bike Company. We look forward to working with you before, during and after you bike purchase.

Contact Us