Yeti SB100 T3 Complete, Turq Series

Yeti SB100 T3 Complete, Turq Series

The Yeti SB100 T3 complete offers XC and Trail riders 100mm of Switch Infinity suspension paired with cutting edge geometry. The Yeti SB100 is fast, fun and confident from all day XC adventures to after work trail rips. Spec your dream SB100 with our custom builder!

$7,899.00

Inquire Here

  • Description
  • Yeti SB100 Geometry & Sizing
  • BikeCo Pro Tunes
  • Pricing, Incentives, Upgrades & Questions

Description

Yeti SB100 T3 Complete, 100mm Travel Switch Infinity Suspension, 29″, Turq Series

The Yeti SB100 T3 Complete spec’s Fox Factory Suspension, SRAM XX1 drivetrain, SRAM Level TLM Brakes, Fox Transfer seatpost as well as Maxxis tires. The T3 complete features the top tier Yeti Turq frame designed for the ultimate balance of weight, performance and longevity. AXS, Lunch Ride and Wheel Upgrades are available.

The Yeti SB100 frame is designed for riders who enjoy both all day XC adventures and high speed trail rips. Pairing cutting edge geometry with the trail proven Switch Infinity produces a bike that is nimble, quick on acceleration and confident on the trails. Additionally riders will find the Yeti SB100 offers a comfortable, centered riding position in a wide range of terrain. Well balanced front and rear the SB100 frame allows confident higher corner entry speed besides its’ explosive acceleration under power. Undoubtedly the SB100 is on trail rider’s short list for review – if you have questions on the SB100’s capacity or personality reach out to our expert staff for clarification.

BikeCo Pro Tune Suspension

You’ve decided the Yeti SB100 is the frame for you and want to take it’s performance to the next level? Personalize the Fox Suspension’s performance with a BikeCo Pro Tune. Click on the Pro Tune tab to learn in what sets BikeCo’s custom tuned suspension apart!

BikeCo Frame Prep

All frame, frame kit as well as complete purchases receive a thorough BikeCo Frame Prep.  Riding a bike without appropriate bearing retention, torque and alignment is hard on components. As a result “loose” bikes not only make noise as well as wear prematurely. BikeCo’s expert mechanics go through each chassis ensuring that suspension, bearings, and hardware are setup for maximum performance as well as longevity. Many home builders have a full frame assembly completed by BikeCo mechanics to ensure the best setup, in brief headsets, bottom brackets, suspension, derailleur hangers, etc are gone through piece by piece.


Want to compare more builds? Check out the factory Yeti SB100 completes.

Know exactly what you’re looking for? Use BikeCo’s Yeti SB100 Custom Complete Builder to spec every component for your dream build. The builder will provide you the bike’s MSRP and our team will contact you with a Personalized Price Quote.


From Yeti’s Site:

This is what we can do with short travel and our newly configured Switch Infinity. It transcends the weight-weenie, uphill only models and replaces it with a precision riding bike. If some people assume it’s a downhiller’s XC bike, whatever… Call it what you want. For us, it’s simply the bike we always wanted to build. The SB100.

We redesigned the Switch Infinity specifically for 100mm of travel – it’s lighter and tucks neatly behind the seat tube. There is no performance compromise with the compact Switch mechanism. It utilizes the same proven Fox Racing bushing, seals, and Kashima stanchions.

The new Switch Infinity design allows space for an uninterrupted seat tube, accommodating longer dropper seatposts and a water bottle mount in the front triangle.

Instead of chasing featherweight on the build, we spec’d the bike as we tested it – Fox Transfer post, Maxxis 2.3 tires, as well as 180mm front rotor. It’s still light, but also right. Our pro rider, Geoff Kabush, will be defending his BC Bike Race title on this rig.

Frame Specs

Travel:  3.9” (100MM)
Frame Weight:  5.5 LBS (2.50 KG)
Wheel Size:  29”
Frame Size:  SM, MD, LG, XL
R.Shock:  190mm x 37.5mm
B.Bracket:  PF92
R.Wheel:  148mm X 12mm (BOOST)
F.Derailleur:  N/A
Seatpost:  30.9mm

Yeti SB100 T3 Eagle Kit Component Spec

 

*spec / price subject to change per Yeti Cycles

T3 Kit
Spec
Frame TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed Enduro Max pivot bearings, integrated derailleur hanger, and axle.
Travel 100MM (4”)
Material TURQ SERIES
Weight 26.40 LBS
Fork FOX FACTORY 34/120MM SC
Shock FOX FACTORY DPS 190 X 37.5MM
WHEELSET DT SWISS M1700 25MM
REAR DER SRAM XX1 EAGLE
SHIFT SRAM XX1 EAGLE
CRANK SRAM X01 EAGLE 30T SM: 170MM, MD-XL: 175MM
BB SRAM DUB BB92
CASSETTE SRAM XX1 EAGLE 1295 10-50
CHAIN SRAM XX1 EAGLE
BRAKES SRAM LEVEL TLM
ROTORS SRAM CENTERLINE 180/160
POST FOX TRANSFER 31.6MM / SM: 125MM, MD: 150MM, LG-XL: 175MM
FRONT TIRE MAXXIS MINION DHF 2.3 EXO
REAR TIRE MAXXIS AGGRESSOR 2.3 EXO
HEADSET CANE CREEK 40 INTEGRATED
BAR YETI CARBON 35X760MM
STEM RACE FACE TURBINE BASIC 35X50MM
GRIPS ODI ELITE PRO
SEAT WTB VOLT CUSTOM
UPGRADES  
AXS +$600
DT SWISS XMC 1200 25MM +$1,400
DT SWISS XMC 1200 25MM & AXS +$1,900

 

Yeti SB100 Geometry & Size Interactive Comparison

Compare reach, stack and wheelbase across the Yeti SB100 size range with BikeCo.com's interactive builder.

Want to compare the SB100 with other Trail & Enduro 29ers?
Check out our Interactive Geo Comparison Here

 

Yeti Cycles SB100 Geo

Yeti Cycles SB100 Geometry

YETI SB100 Frame Geometry

*measurements in inches

120mm Fork Small Medium Large X-Large
 

Seat Tube Length

A  

15.5

 

16.5

 

18

 

19.5

Toptube Length B 22.7 23.8 24.8 25.9
Headtube Angle C 67.8 67.8 67.8 67.8
Eff. Seat Tube Angle D 74.3 74.2 74.1 74
Chainstay Length E 17.2 17.2 17.2 17.2
Wheelbase F 44.2 45.3 46.4 47.5
Estimated BB Height G 13.1 13.1 13.1 13.1
Standover H 28.5 28.5 28.5 28.5
Headtube Length I 3.8 4.2 4.9 5.7
Axle to Crown J 20.9 20.9 20.9 20.9
Offset K 1.7 1.7 1.7 1.7
Stack L 23.7 24.1 24.7 25.5
Reach M 16 17 17.8 18.6
Front Center N 27 28.1 29.1 30.2
 

 

Sizing

 

 

5’3” -5’7”

 

 

5’7” – 5’11”

 

 

5’11”–6’3”

 

 

6’3”-6’6”

Maximize your suspension’s performance with BikeCo Pro Tunes

BikeCo offers proprietary Pro Tune services on the majority of Fox forks and rear shocks.

Fox Suspension is the pinnacle of performance, reliability, and longevity in our industry. Stock Fox suspension comes out of the box with a fairly aggressive tune – which is terrific for powerful, strong, aggressive riders with high ground speeds. Sounds like their World Cup DH and Enduro riders, right?

Pro Tune services calibrate the incredible performance of Fox suspension into a narrower band personalized to your riding specifics.

Utilizing a combination of proprietary lube oils, improved upper to lower fork fit, shim stack configuration, updated oil flow, unmatched bleed quality, and a few other trade secrets BikeCo Pro Tunes improve tracking, small bump compliance, minimize brake dive, run cooler (equating to more predictable performance from top to bottom of your descent), operates comfortably in a wide range of temperature (we test from freezing to 100 degrees), improves oil circulation, extends service intervals and more.

The most important advantage of Pro Tune suspension? Whether you are new to the sport or an experienced pro: suspension that works will let you ride more confidently. You will ride faster and have more fun with BikeCo Pro Tune Suspension.

To ensure that your suspension is dialed in our staff will review your riding experience, aspirations, ground speeds, size (height and weight) as well as specific chassis. BikeCo stands behind our Pro Tune service with a 30 day retune service if you feel that your particular riding requires a shift in tuning. BikeCo also offers discounted disposition retunes as your skillset progress if required.

After the Pro Tune your suspension only requires standard levels of maintenance in the future. To maintain the best performance BikeCo recommends sending the suspension in (we use proprietary lube oils, have specific bleed techniques, etc) although standard Fox oils can be used. Standard lubes will compromise some of the finite tune but with the other Pro Tune modifications a standard lube shock will still out perform stock.

Ready to go? Fill out the online form below and we will get you dialed in.
Have a few more questions? Give us a call or send us a message and our expert staff is happy to work with you!

Pro Tune Form

Riding Discipline
XCTrailEnduroBig Mtn / ParkDH

*required fields

Pricing, Incentives, Upgrades & Questions – BikeCo has you covered

Chat with our expert sales staff for the best market incentives, performance hop ups, setup tips and more!

Chris and Landon lead the BikeCo sales team and are always up to date with the best deals for clients at all levels and across all riding styles. Years of experience on trail with a variety of the best frames, suspension, wheels, tires and accessories means the staff at BikeCo is able to help you define which components will best compliment your riding (conversely we can help steer you away from problematic gear as well).

Reach out via email - Chris is available Chris@BikeCo.com & Landon Shipping@BikeCo.com, chat, call - 949-470-1099 or 888-697-6717 or use this quick online form to start the process with the leaders in sport to pro level MTB – the experts from The Bike Company. We look forward to working with you before, during and after you bike purchase.

Contact Us