Yeti SB160 C1 Complete Large Turquoise

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

When you buy a bike from BikeCo.com you’re not getting simply a forwarded box.

Our team goes through quality control checks, builds, tunes and provides a base setup for each bike. This allows us a better chance to find the rare mechanical warranty issue, to ensure that the linkage and bearings are properly setup.

A suspension setup guide is provided and our team will begin working with you to ensure as your riding develops with your new bike suspension settings, cockpit setup, tire pressures, etc are addressed to keep you progressing.

Since we build every bike we can also offer part swaps and upgrades our competition simply cannot!

Looking for different tires? Brakes? Cockpit or Seating? Not a problem. Our team is happy to help you. Chat with our sales team about during and after purchase incentives on riding gear and accessories as well!

Your new bike typically will arrive with an absolute minimum of work required to get you on the trails. Usually this involves installing the handlebars, adjusting the headset and mounting the front and rear wheel. It’s that easy – and if you have questions you have access to the sales team and a variety of videos from BikeCo.com to help you.

Questions? No problem. Hit us up.

Air Spring & Volume Spacers

The FOX 38 provides riders a range of setup options using air spring as well as volume spacers.

Suggested sag is 15% for a firm feel and 20% for a plush fork. On the stock 170mm setup 15% equals 25.5mm of sag. 20% will use 34mm of sag.

Volume Spacers

The 170mm FOX 38 is factory spec’d with 2 volume spacers (bike manufacturers may or may not change this). The 170mm fork can carry a maximum of 5 volume spacers.

Do not install more volume spacers than the FOX advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

Learn more about the FOX 38 on FOX’s Tuning Guide Here (opens in new tab)

Stock: Performance GRIP

Rebound – 10 clicks of Low Speed rebound control

or Upgrade to the Factory GRIP2:

FOX 38 GRIP2 Rebound Controls

The GRIP2 damper provides both Low (LSR) and High (HSR) rebound controls.

The addition of the High Speed or HSR control provides increased rebound control to account for the higher PSI produced by aggressive or heavier riders.

Typically riders will adjust LSR, Low Speed Rebound, to suit riding style and taste and refer to FOX’s guide for the appropriate HSR, High Speed Rebound, pairing.

STOCK: Performance GRIP

Three on-the-fly compression damping positions: Open, Medium & Firm
Additional detent micro-adjustment between settings

or Upgrade to Factory Suspension

FOX GRIP2 Compression Controls

The FOX GRIP2 damper provides Low and High speed compression controls to fine tune support.

Compression circuits hydraulically damp (or slow) the fork’s input assisting the air spring in providing appropriate mid-stroke and bottom out feel.

Low Speed Compression helps provide mid-stroke support. This allows a bike to ride taller in the travel in cornering while resisting brake dive, rider weight shift and other slow shaft speed inputs.

High Speed Compression works to fine tune bottom out feel as well as other high shaft speed inputs also known as square edge bumps. Example: if you sprint straight into a curb you’re likely to engage the High Speed Compression even if you’re not using full travel. This is due to the speed of the shaft moving oil to compensate for the hit.

Air Spring & Volume Spacers

Both the stock FOX Performance Float X as well as the FOX Factory X2 offer offer air and volume adjustments.

SAG is adjusted by PSI – typically Enduro riding styles gravitate to 25-30% sag. This would measure about 17mm for a plush setup.

Volume Spacers

Volume spacing provides fine tuning options to support the air spring.

By adding volume spacers, thus reducing the volume, you increase the air spring’s ramp rate for improved bottom out support and pop.

Conversely removing volume spacers produces a more linear feel as the air has more volume during shock compression per mm of travel.

Do not install more volume spacers than the FOX advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

Stock: Fox Performance Float X

Provides riders Low Speed Rebound Adjustment

Upgrade: FOX Factory Float X2

FOX FLOAT X2 Rebound Controls

The X2 rear shock provides both Low (LSR) and High (HSR) rebound controls.

The addition of the High Speed or HSR control provides increased rebound control to account for the higher PSI produced by aggressive or heavier riders.

Typically riders will adjust LSR, Low Speed Rebound, to suit riding style and taste and refer to FOX’s guide for the appropriate HSR, High Speed Rebound, pairing.

Low Speed Rebound is located near the Compression Controls and 2 position switch. High Speed Rebound adjustments are made on the opposite end of the shock near the eyelet.

Stock: FOX Performance Float X

On-the-fly Open / Firm Lever

Upgrade: FOX Factory Float X2

FOX X2 Compression Controls

The FOX X2 provides Low and High speed compression controls to fine tune support as well as a 2 position OPEN or FIRM switch..

Compression circuits hydraulically damp (or slow) the fork’s input assisting the air spring in providing appropriate mid-stroke and bottom out feel.

Low Speed Compression helps provide mid-stroke support. This allows a bike to ride taller in the travel in cornering while resisting brake dive, rider weight shift and other slow shaft speed inputs.

High Speed Compression works to fine tune bottom out feel as well as other high shaft speed inputs also known as square edge bumps. Example: if you sprint straight into a curb you’re likely to engage the High Speed Compression even if you’re not using full travel. This is due to the speed of the shaft moving oil to compensate for the hit.

The FOX X2 provides 16 clicks of Low Speed Compression adjustment as well as 8 clicks of High Speed Compression controls.

Yeti SB160 C1 Spec:

Fork
Fox Float 38 Performance Series 170mm, 44mm offset, 29, 110×15

Shock
Fox Performance Float X

Wheels
DT Swiss Custom E1900 30mm*
upgrade available! to EXC 1501 30mm Carbon Rims

Front Tire
Maxxis Assegai 2.5 WT, EXO Plus

Rear Tire
Maxxis Minion DHR II 2.4 WT, EXO Plus

Brakes
Shimano SLX 4 piston

Brake Rotors
Shimano 220 / 203

Cranks
Shimano SLX, 30t, 170mm

Bottom Bracket
Shimano XT BB73

Rear Derailleur
Shimano SLX

Shift Levers
Shimano XT

Cassette
Shimano SLX 10-51t

Chain
Shimano SLX

Headset
Cane Creek 40 Integrated

Grips
ODI Elite Pro

Handlebar
Burgtec Ride Wide Alloy Enduro 35x800mm, 35mm rise

Stem
Burgtec Enduro MK3 35x50mm

Seatpost
OneUp Dropper
S: 150mm, M: 180mm, L-XXL: 210mm

Saddle
Silverado Custom

SB160 C1 Build Frequent Swaps

Let’s get you exactly what you want with great savings at time of initial purchase!

Below are some common swaps for the Yeti SB160 C1 Complete

Suspension: With the Yeti Factory FOX Suspension upgrade at time of purchase you can get the best suspension on your bike at an unbeatable price.

Brakes: Most riders will upgrade or swap the Code RSC brakes. Shimano XT or XTR, Magura MT7 , the new Hope series – even TRP are making in-roads in the brake market.

Wheels: Onyx silent hubs, Chris King hubs, Industry Nine Hydra – all are at home on a build at this level. We work with a range of carbon rims to allow you to fine tune rim width and stiffness as well. Wheels are a BIG part of a bike’s personality so chat with our team to get it right the first time!

Cockpit: If you have a cockpit you like let’s get it on the bike. Many riders find carbon bars help minimize arm pump and fatigue.

Seating: Like cockpit, if you have a saddle or seatpost you love its a common change across all the builds.