Sale!

Yeti SB160 T4 Complete XX-Large Cobalt

$8,600.00

Built as a no-holds-barred Enduro machine the Yeti SB160 is unapologetic in burly terrain at speed, but has not compromised its pedaling and acceleration for that personality.

Learn more about the Yeti SB160 T4 Complete Spec, Suspension options and upgrades as well as frequent part swaps and upgrades to this kit.

AVAILABLE: Secure This Bike - Updated 10/02/23

SKU: SB160 T XXL Cobalt T4 Categories: , , , , , Tags: , , ,

Description

2023 Yeti SB160 T4 Complete in Cobalt

Click on these tabs to learn more about the purchasing process from BikeCo.com

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

When you buy a bike from BikeCo.com you’re not getting simply a forwarded box.

Our team goes through quality control checks, builds, tunes and provides a base setup for each bike. This allows us a better chance to find the rare mechanical warranty issue, to ensure that the linkage and bearings are properly setup.

A suspension setup guide is provided and our team will begin working with you to ensure as your riding develops with your new bike suspension settings, cockpit setup, tire pressures, etc are addressed to keep you progressing.

Since we build every bike we can also offer part swaps and upgrades our competition simply cannot!

Looking for different tires? Brakes? Cockpit or Seating? Not a problem. Our team is happy to help you. Chat with our sales team about during and after purchase incentives on riding gear and accessories as well!

Your new bike typically will arrive with an absolute minimum of work required to get you on the trails. Usually this involves installing the handlebars, adjusting the headset and mounting the front and rear wheel. It’s that easy – and if you have questions you have access to the sales team and a variety of videos from BikeCo.com to help you.

Questions? No problem. Hit us up.

Yeti SB160 T4 Complete: XX-Large, Cobalt

Learn More about the Yeti SB160 T4 Complete size XX-Large in Cobalt

The Yeti SB160 brings a variety of improvements to the already legendary Yeti SuperBike range. Learn more about how the new Yeti SB160 design provides better trail performance AND substantially easier build and maintenance.

The Yeti SB160 T4 Complete is the top of the line Yeti complete – however – we know at this level you probably want to fine tune your spec. No problems. At BikeCo.com we have the best parts available for swaps or upgrades to fine tune the performance of your new dream bike.

Questions? Use the form below, chat, call 949-470-1099 or email CustomerService@BikeCo.com to chat with our sales team.

Yeti SB160 Complete – Turquoise, Radium & Cobalt (images may not show kit referenced on this page)

Yeti SB160 T-Series Suspension Details

Learn more about the SB160 Turq series FOX Factory Suspension as well as available upgrades.

Yeti SB160 T-Series Fork

The SB160 is spec’d with a 170mm travel FOX Float 38 GRIP2.

The GRIP2 features 2 rebound controls (high and low speed) as well as 2 compression controls (again, high and low speed).

Fine tuning is available with the rebound, compression as well as PSI and volume spacing.

Air Spring & Volume Spacers

The FOX 38 provides riders a range of setup options using air spring as well as volume spacers.

Suggested sag is 15% for a firm feel and 20% for a plush fork. On the stock 170mm setup 15% equals 26mm of sag. 20% will use 34mm of sag.

Volume Spacers

The 170mm FOX 38 is factory spec’d with 2 volume spacers (bike manufacturers may or may not change this). The 160mm fork can carry a maximum of 5 volume spacers.

Do not install more volume spacers than the FOX advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

GRIP2 High and Low Speed Rebound Control at the base of the damper leg lower.

FOX 38 GRIP2 Rebound Controls

The GRIP2 damper provides both Low (LSR) and High (HSR) rebound controls.

The addition of the High Speed or HSR control provides increased rebound control to account for the higher PSI produced by aggressive or heavier riders.

Typically riders will adjust LSR, Low Speed Rebound, to suit riding style and taste and refer to FOX’s guide for the appropriate HSR, High Speed Rebound, pairing.

FOX GRIP2 High and Low Speed Compression Controls

FOX GRIP2 Compression Controls

The FOX GRIP2 damper provides Low and High speed compression controls to fine tune support.

Compression circuits hydraulically damp (or slow) the fork’s input assisting the air spring in providing appropriate mid-stroke and bottom out feel.

Low Speed Compression helps provide mid-stroke support. This allows a bike to ride taller in the travel in cornering while resisting brake dive, rider weight shift and other slow shaft speed inputs.

High Speed Compression works to fine tune bottom out feel as well as other high shaft speed inputs also known as square edge bumps. Example: if you sprint straight into a curb you’re likely to engage the High Speed Compression even if you’re not using full travel. This is due to the speed of the shaft moving oil to compensate for the hit.

Yeti SB160 Rear Shock Options

The SB160 has been designed with a more linear mechanical design improving the feel deep into the travel.

Paired with the stock FOX Float X2 riders can tune the compression and volume spacing to provide that perfect tune option (it’s easier to increase pop or “progressive-ness” with volume and compression than trying to tune “linear” into a more progressive mechanical design).

Most riders will prefer the Float X2 with it’s high and low speed adjustments on both compression and rebound, however, the SB160 can also be spec’d with a coil shock.

Wondering what’s right for you? Chat with our team about your size, speed, riding style and which shock you’re going to prefer!

Air Spring & Volume Spacers

The spec’d Fox Float Factory X2 is the most popular based on its wide variety of setup options.

SAG is adjusted by PSI – typically Enduro riding styles gravitate to 25-30% sag. This would measure about 17mm for a plush setup.

Volume Spacers

Volume spacing provides fine tuning options to support the air spring.

By adding volume spacers, thus reducing the volume, you increase the air spring’s ramp rate for improved bottom out support and pop.

Conversely removing volume spacers produces a more linear feel as the air has more volume during shock compression per mm of travel.

Do not install more volume spacers than the FOX advises. Installing more than the maximum volume spacers will result in  product damage and potential for injuries, etc.

Low and High Speed Rebound Positions on FOX Float X2

FOX FLOAT X2 Rebound Controls

The X2 rear shock provides both Low (LSR) and High (HSR) rebound controls.

The addition of the High Speed or HSR control provides increased rebound control to account for the higher PSI produced by aggressive or heavier riders.

Typically riders will adjust LSR, Low Speed Rebound, to suit riding style and taste and refer to FOX’s guide for the appropriate HSR, High Speed Rebound, pairing.

Low Speed Rebound is located near the Compression Controls and 2 position switch. High Speed Rebound adjustments are made on the opposite end of the shock near the eyelet.

High and Low Speed Compression Controls on FOX X2

FOX X2 Compression Controls

The FOX X2 provides Low and High speed compression controls to fine tune support as well as a 2 position OPEN or FIRM switch..

Compression circuits hydraulically damp (or slow) the fork’s input assisting the air spring in providing appropriate mid-stroke and bottom out feel.

Low Speed Compression helps provide mid-stroke support. This allows a bike to ride taller in the travel in cornering while resisting brake dive, rider weight shift and other slow shaft speed inputs.

High Speed Compression works to fine tune bottom out feel as well as other high shaft speed inputs also known as square edge bumps. Example: if you sprint straight into a curb you’re likely to engage the High Speed Compression even if you’re not using full travel. This is due to the speed of the shaft moving oil to compensate for the hit.

The FOX X2 provides 16 clicks of Low Speed Compression adjustment as well as 8 clicks of High Speed Compression controls.

BikeCo Exclusive: Pro Tune Suspension

There are a lot of reasons to shop at The Bike Company (BikeCo.com). Some are: Unmatched attention to detail. Incredible after sales setup follow up. Pro Tune Suspension.

Our team works with the FOX fork and shock lineup to take the already great FOX suspension to the next level. Working with our team of suspension tuners we will narrow the FOX performance window based on your size, riding style, terrain, ground speeds, aggression, goals and chassis.

What’s it mean to narrow the performance window? Well, each click is more precise. The fluid is hand picked for you. The bleed is more precise.

On trail your suspension will be more plush while maintaining the support and progression you need to really attack the trail.

For racers our tuned suspension subtracts seconds from your run. For pleasure riders it improves the traction and feel allowing you to progress quicker in your riding.

Talk to our team about the advantages of BikeCo Pro Tunes today.

Yeti SB160 T4 Complete

The no-holds-barred XX1 AXS top of class Yeti SB160 lineup.

T4 Build Highlights

Where do we start with the SB160 T4 build??

– SRAM XX1 AXS wireless shifting (with wireless trim adjustment!)
– DT Swiss Custom EX1700 wheels with option to upgrade to DT Swiss EXC 1501 30mm Carbon Rims!

MSRP: $10,800

Yeti SB160 T4 Spec:

Fork
Fox Float 38 Factory Series 170mm, 44mm offset, 29, 110×15

Shock
Fox Float Factory Series X2

Wheels
DT Swiss Custom EX1700 30mm*
upgrade available! to EXC 1501 30mm Carbon Rims

Front Tire
Maxxis Assegai 2.5 WT, EXO Plus

Rear Tire
Maxxis Minion DHR II 2.4 WT, EXO Plus

Brakes
SRAM Code RSC

Brake Rotors
SRAM Centerline 220/200

Cranks
SRAM X01 Eagle, 30t, 170mm

Bottom Bracket
SRAM DUB BSA

Rear Derailleur
SRAM XX1 Eagle AXS

Shift Levers
SRAM XX1 AXS 2 Button Eagle Triggers

Cassette
SRAM XG 1299 Eagle 10-52

Chain
SRAM XX1 Eagle

Headset
Cane Creek 110 Integrated

Grips
ODI Elite Pro

Handlebar
Yeti Carbon 35×800

Stem
Burgtec Enduro MK3 35x50mm

Seatpost
FOX Transfer Factory
S: 150mm, M: 175mm, L-XXL: 200mm

Saddle
Ergon SM Enduro

Power
XX1 AXS battery & power pack charger

SB160 T4 Build Frequent Swaps

At this level it’s hard to shake a stick at anything, but, at this level you should get exactly what you want right?

Below are some common swaps for the Yeti SB160 T4 Complete

Common Yeti SB160 T4 Upgrades and Swaps

Brakes: Most riders will upgrade or swap the Code RSC brakes. Shimano XT or XTR, Magura MT7 , the new Hope series – even TRP are making in-roads in the brake market.

Wheels: Onyx silent hubs, Chris King hubs, Industry Nine Hydra – all are at home on a build at this level. We work with a range of carbon rims to allow you to fine tune rim width and stiffness as well. Wheels are a BIG part of a bike’s personality so chat with our team to get it right the first time!

Cockpit: If you have a cockpit you like let’s get it on the bike.

Seating: Like cockpit, if you have a saddle or seatpost you love its a common change across all the builds.

Compare Yeti SB160 Builds

Want to compare the Turq Series Builds: T4, T3, T1 or the Carbon Series: C2 and C1 spec? Jump over to a post that shows all of the builds as well as some of the more popular upgrades and swaps across them all.

Compare Yeti SB160 Geometry

Open the tab to the right to display our interactive mtb geometry comparison.

Review bottom bracket, chainstay, wheelbase, headtube angle, trail, reach and stack as well as effective top tube.

Compare the Yeti SB160 Sizes with bikes from Yeti, Ibis, Mondraker and Nukeproof.

Yeti SB160: Comparative Bikes

What else is on your short list when shopping the Yeti SB160?

Well, the new Yeti has more travel than most of it’s Enduro competition – so if you’re looking for the most bike for the burliest days – the SB160 is a tough bike to beat.

Currently the list of bikes that are comparable to the Yeti SB160 would be the Ibis Ripmo with a 170mm fork and the 150mm travel Mondraker FOXY as well as the Nukeproof Mega and Giga.

In the longer travel bikes riders will note personality differences in early and mid stroke travel. The Yeti is a bike that begs for speed and rewards an active rider. The Nukeproof and Ibis have the speed capacity and a slightly more mellow personality while the Mondraker tends to reward a rider like a Yeti.

Wondering which is right for you? Chat with our team about the finite details that separate those class leading bikes.

Return to Top of Page



Contact Us about this Yeti SB160 T4 Complete: XX-Large in Cobalt

Additional information

Ibis by Model
Mondraker by Model
Mondraker by Size
Nukeproof Status
Ibis Status
Mondraker Level: Model
Ibis Level: Model
Mondraker Status
Mondraker by Type
Yeti Level Frame Complete

Ibis by Size
MPN

B23160TXXPCBX2TA48700

Bikes Status

Available, Closeout Pricing

Brand

Yeti

Yeti by Type

MTB

Bikes MTB or eMTB

MTB

Bikes by Wheel Size

29"

Yeti by Model

SB160

Size

XX-Large

Bikes by Brand

Yeti

Yeti by Size

XX-Large

UPC

605832573434

Color

Cobalt

Bikes by Model

SB160

Yeti Status

Available, Closeout Pricing

Bikes by Size

XX-Large

Yeti by Frame or Complete

T4