Posted on Leave a comment

Custom Mondraker RAZE Carbon Build

Custom Mondraker RAZE Carbon Complete

Enjoy some pics of this banging Custom Mondraker RAZE Carbon Complete.

The RAZE is a 130mm travel frame and pairs with 150mm or 160mm fork options depending on your terrain and geometry preference.

The 150mm stock setup gives the RAZE a quick handling feel comfortable in a wide range of terrain and into the enduro category. Adding the additional 10mm of fork travel gives the bike a little bit more “punch” in the enduro terrain by slightly slackening the headtube angle, raising the bottom bracket a touch as well as adding a little more travel for those big moments.

Custom Mondraker RAZE Carbon Pics

Mondraker RAZE Carbon with XX1 AXS and AbsoluteBlack Oval Chainring

This rider went with the SRAM AXS wireless setup, subtracting one cable from the cockpit for an even cleaner look and crisp performance.

Cable routing is done through the headtube for an ultra modern look on the Mondraker lineup.

An AbsoluteBlack oval chainring compliments the 52t Eagle cassette.

SRAM XX1 AXS on Mondraker Raze Carbon

Mondraker’s Zero Suspension mounts both upper and lower shock points to the linkage creating a floating suspension that is very compliant while still being notably efficient.

The FOX DPS rear shock provides riders volume tuning as well as low and high speed compression settings and rebound to fine tune its performance.

ONYX hubs on custom wheels by BikeCo on Mondraker RAZE Complete

ONYX silent, instant engagement hubs are seen on more and more builds.

Available in a variety of colors and finishes to compliment your build, this build features my very favorite option. Blacked out!

Mondraker RAZE Cockpit and Headtube

This Mondraker RAZE weighed in at 28 lbs! Impressive for a bike comfortable well into enduro level terrain. Note the EXO+ front tire as well…

Shopping the Best in MTB

Are you in the market for a 2022 Mondraker? or Ibis or Yeti? At BikeCo.com we have #thebestinMTB : products and support staff to keep you dialed in.

Mondraker RAZE headtube, downtube and toptube junction
Posted on Leave a comment

Ibis Hakka MX Build Shots

10 17 18 Ibis Hakka MX Complete

Ibis Hakka MX Build Shots

Enjoy detail shots of an Ibis Hakka MX build from BikeCo.com.

The Ibis Hakka MX is designed as a gravel bike. However Ibis’ progressive geometry creates a confident road riding platform familiar to mountain bike riders.

Ibis’ attention to detail as well as impressive carbon technology provide a strong, stout chassis ready for just about anything you want to throw at it. With a 1000g frame weight the Hakka is lightweight enough for century days while strong enough to rip your single track shortcut home. Continue reading Ibis Hakka MX Build Shots