Posted on Leave a comment
Yeti SB130 with SRAM XX1 AXS

Yeti SB130 with SRAM XX1 AXS

Looking to go all in with your SB130? Check out this Yeti SB130 with SRAM XX1 AXS build by BikeCo!

SRAM’s new AXS wireless shifting provides clean mounting with crisp shifting. And no cable stretch or barrel adjusters!

Yeti SB130 with SRAM XX1 AXS rear derailleur detail

Let’s get right to it! The SRAM XX1 AXS rear derailleur. This derailleur has a removable battery pack for charging as well as a break away hinge in case you find a rock or tree.

SRAM’s unique rainbow chain and cassette have this unique gleam in the right light. While I thought it was going to be ridiculous – seeing it in person it’s actually a cool color effect!

SRAM XX1 AXS bluetooth shift controller on Yeti SB130

The XX1 AXS Shifter, or maybe remote, is easy to adjust for ergonomics. In this case the shifter is run inboard of the Magura MT7 brakes.

Chris King headset and OneUp Tool are visible.

Raceface Next-R 35 bars mount to a Turbine-R stem with 20mm of stack to begin. Balancing the amount of stem stack is important for a bike’s overall personality. Too low and the bike will feel like it is trying to “suck” out from under you in the steeps. Too tall and you give up some front end grip while pedaling. Questions on your new build? No problem our expert staff is here to make sure you get the right components as well as the right setup. Then our team will contact you after pickup to help you fine tune your bike’s settings.

 

Yeti SB130 Spruce color custom build by BikeCo.com

 

Such a mean build! The Yeti Matte Spruce color has just the right amount of “pop” while being relatively understated.

 

More details

SRAM XX1 AXS drivetrain detail on Yeti SB130 Spruce complete

Another shot of the SRAM XX1 AXS system. You can also see the Magura 180mm HC rotors as well as the Wolftooth GnarWolf guide.

 

Seating and cockpit of Yeti SB130 Spruce complete.

Ergon saddle and grips provide confident and comfortable contact points. Alliteration right there… My 7th grade English teach should be proud I remember that word…

This bike is slated for the new Reverb AXS wireless post but until that’s available we’ve set it up with the BikeYoke Revive 160mm. The Revive is popular as it has a bleed valve allowing quick service to a post that’s cavitated.

BikeCo Pro Tune Fox Float Factory DPX2 and Fox Factory Float 36 Grip2 suspension keep the rubber on the trail. This fork is setup at 160mm for a bit more trail capacity.

 

Front wheel detail of Chris King matte jet hubs on Enve carbon rims with Magura MT7 calipers

 

Custom wheels, hand-built by BikeCo.com. Do you want to get the most out of your wheels? Let our artisan builders dial you in. These Chris King Matte Jet hubs are laced to ENVE M730 carbon rims. The M730 feature a unique rim strip which eliminates tubeless tape while offering protection to the carbon hoop. It’s a two-fer!

In the market? Chat with our team. We have the best custom, semi-custom, factory completes and frame swap options. At BikeCo.com we’ve worked to offer riders the best spec, setup, tune and pricing in MTB.

Start penciling out your build now!

Custom Yeti SB130 Builder


Back to Bike Builds

 

Return to top of page.