Compare Mondraker Crafty Carbon Builds

The eMTB Mondraker Crafty Carbon is available in 4 kits.
The Crafty Carbon RR SL is Black with Red White and Blue highlighting.
For the Crafty Carbon XR Mondraker uses black with a rich purple accent.
The Crafty Carbon RR is red with grey and black highlights and finally the Crafty Carbon R is white with black and yellow accents.

In-Stock & Available: 2025 Mondraker Crafty Carbon RR SL Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: 2025 Mondraker Crafty Carbon XR Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: 2025 Mondraker Crafty Carbon RR S Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: 2025 Mondraker Crafty Carbon RR Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: 2025 Mondraker Crafty Carbon R Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: 2025 Mondraker Crafty Carbon R Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: Mondraker Crafty Carbon RR SL Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: Mondraker Crafty XR Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: Mondraker Crafty Carbon RR Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

In-Stock & Available: Mondraker Crafty Carbon R Bikes

Don’t see your size or spec below? Contact our team for the lead time! 949-470-1099

2025 Mondraker Carbon Crafty Builds

2025 Mondraker Carbon Crafty Geo Comparison

eMTB and MTB Geo Comparison

Compare the Mondraker Crafty Carbon eMTB geo with other Mondraker bikes as well as models from class leaders like Ibis and Yeti!

This link opens in a new tab and allows you to quickly view the geo between sizes and models.

Mondraker Crafty Carbon Kit Differences

Here’s a quick look at the Mondraker Crafty Carbon builds.

Bosch Motor

The Crafty Carbon XR features the Bosch CX Race motor. While the CX Race has equal power and torque to the CX Performance the CX Race has a higher total assistance level, 400% compared to 340% for the CX Performance. In short the CX Race is capable of slightly faster acceleration due to the increased assistance level as well as weighing in slightly lighter than the CX Performance.

Suspension

On the Crafty Carbon R riders find FOX Performance suspension. A 160mm FOX 38 Performance GRIP fork and a FOX Performance Float X shock.

The RR and RR SL both feature the top tier FOX Factory components. A 160mm FOX 38 Factory GRIP2 offers riders both high and low speed rebound as well as compression controls. Further fine tuning can be achieved through volume spacers and PSI. The FOX Factory Float X rear shock is a nice compliment to this fork with rebound and compression controls.

On the Crafty Carbon XR riders find an Ohlins RXF 38 M.2 fork set at 170mm as well as an Ohlins TTX Air shock.

The FOX and Ohlins suspension offer similar adjustments however have different feels on trail. The Ohlins suspension is designed for a more plush feel while FOX tends to ride a bit more progressive staying a bit higher in the travel for a similar sag setup. Larger riders should chat with our team regarding the trail differences between the FOX and Ohlins bikes.

Cockpit and Brakes

All three kits use 31.8mm diameter cockpit setups.

SRAM brakes are found on all three bikes as well utilizing 200mm rotors.

Read about common upgrades and part swaps on the next tab for more details about the Mondraker cockpit and brake spec.

Drivetrain

All four of the Crafty Carbon build kits spec SRAM drivetrains. The R and XR feature cable driven SRAM options while the RR and RR SL have SRAM’s new Transmission wireless kits. The Transmission drivetrain was designed and built to be the strongest and longest lasting components available. They’re a great option on higher torque eMTB bikes like the Crafty Carbon.

Jump to the common upgrade and swap tab for more info on changes we often see to the Mondraker Crafty Carbon bikes.

Mondraker Crafty Carbon Upgrades and Swaps

BikeCo loves offering riders the ability to fine tune or dial in that perfect bike spec. Whether you’re looking for some minor swaps or want to dial in a full custom Mondraker Crafty Carbon you’ve found the resource.

All and all there is a lot of value for your dollar in the Mondraker builds. But, it’s common for riders to develop preferences.

Whether it’s a performance swap or upgrade or getting you that perfect part in the right color to personalize the Crafty’s performance or look we have you covered.

Common Crafty Carbon Upgrades

These are areas we commonly see riders update a bike purchase. Some are personal preference, others are budget or performance choices. Questions? Chat, email or call our expert sales staff and we will help you buy the perfect Mondraker Crafty Carbon.

Rider Contact Points

Do you have a preferred grip and pedal go-to?

We can provide a range of grips with variable patterns, technology and shape to improve your riding. There might even be a grip in a color to set off your new bike as well.

A lot of riders purchasing a new bike find it a good time to refresh their pedals. We have the best clipless and flat options for a wide range of riding styles at unbeatable prices.

Tires

Like contact points its not unusual for riders to have a “must-have” go to tire spec. This is one of the most common swaps on builds from any manufacturer. With notable performance differences between tread pattern, compound and sidewall lets make sure we get you on the perfect tire setup.

The Crafty Carbon is spec’d with Maxxis EXO+ sidewalls and 3C MaxxTerra compound tires. On the front riders find a 2.6″ Minion DHF and a 2.6″ Minion DHR II in the rear.

This is a very popular option – however – it’s pretty common to see minor modifications or even entire swaps on this tire setup. Many eMTB riders will prefer to move to Double Down or even DH tires to maximize the small bump compliance of their bike. Others may want a more aggressive tread pattern like the Maxxis Assegai. A few may even want a slightly faster rolling rear tires like the Maxxis Aggressor.

Know what you’re looking for? Stoked – let us know and we’ll get the right tires on your new bike. Wondering what’s right for you? No problem there either. Chat with our team about how tires will change your bike’s overall personality as well as how to match your riding style to them. Questions on what tires are right for your riding style and locale? No problem – chat with our team about swapping to tires perfect for you on your new eMTB.

Maybe you’re also thinking about rim protection? We have that covered too. We often see riders use combinations of CushCore PRO and CushCore XC or even a single rim protection strip (usually on the rear tire). Questions? Let us know!

Cockpit

Along with Brakes, Cockpit is the most common place we see part swaps and upgrades. Since fit is so important to your bike it’s not surprising that you’ll want to work with a resource that has more than 1 option!

On eMTB bikes its common to see riders looking for handlebar designs that maximize small bump compliance. The heavier eMTB bikes often utilize more progressive suspension setups for ultimate performance. This means finding small bump compliance elsewhere is important on you aggressive eMTB build.

The most common handlebar for eMTB purchases is the OneUp carbon e-bar. Designed with a unique shape to provide maximum stiffness in a fore/aft load but while offering subtle give in vertical loads.

Another common handlebar spec is the carbon option from TAG Metals which has an ovalized internal design for similar performance benefits.

Handlebar rise and overall stiffness also improve the personalization and performance of your bike. As you trim your bars they will get stiffer due to the decreased lever arm – so if you’ve got narrower shoulders you’ll likely want to start with a narrower bar rather than cutting tons off. Similarly getting the right bar rise will help your setup. Ideally you want your hands in a power position. Too low and the bike will try to pull “under” and out in steep chutes. Too tall and you’ll lose front end grip. While some of this is adapted with headset spacers the preference for performance and looks is generally to have 15-30mm of spacers and get the rest of the rise from the handlebar.

Looking for suggestions? Chat with our team about hand positioning and the advantages of getting the right handlebar rise on your new rig. We have the best in the market from OneUp, Tag, Renthal and Raceface.

Brakes

This is one of the most common swaps or upgrades on any bike. Brakes that compliment your riding style and preference make a huge difference on trail. We offer class leading options in a variety of price points from Hope, Magura, Shimano and TRP.

Most riders will update brakes on the Mondraker builds.

Shimano brakes are very popular and are spec’d on several of the build options. Shimano brakes have good overall power with quick lever throw. This produces a brake with a strong feel.

TRP brakes are similar to the Shimano lineup. The TRP brakes provide a touch more overall power and extra modulation compared to Shimano offerings.

Riders who prefer a bit more modulation or “feel” to their brakes gravitate towards Hope and Magura.

The latest Hope Tech 4 updates have improved their power. This puts the Hope Tech 4 in the Shimano and Magura range for overall power while retaining the excellent modulation Hope has been known for.

Magura brakes are the most frequent swap or upgrade across all Ibis builds. Riders who appreciate modulation and power will find Magura excellent in both aspects. Magura offers models with across a wide price range allowing budget friendly swaps or upgrades. Riders looking for the most adjustability or tuning for their brakes will shop the MT7 with HC3 levers.

Custom Wheels

Handbuilt or custom wheels are another popular upgrade no matter what brand you’re shopping. Custom wheels allow riders to spec a rim, spoke and hub combination as well as build specifics for the ultimate performance.

We see many riders work with NOX carbon or WTB, Factor and RideFast alloy options.

Riders also will find traction from using the right spokes and build techniques. Our team will help you define this at time of purchase to ensure you maximize performance and longevity.

Popular hubs from Chris King, Industry Nine, Onyx and Factor are spec’d on eMTB builds. All of these hubs are available in a range of colors to highlight your build with the strength to handle the extra power from the motor.

Pro Tune Suspension

Take your bike’s performance to the next level with our proprietary Pro Tune Suspension. Our team will custom tune your FOX fork and rear shock and narrow the performance from the FOX Factory range to a more precise setup designed for your riding style, aggression, ground speed, size and terrain.

This is one of the biggest upgrades to any bike – having the suspension dialed in as well as having a resource like BikeCo to help you fine tune the bike at time of delivery and as your riding speeds increase!

BikeCo Pro Tune Suspension – because Every Click Counts.

Dialing in the perfect Mondraker Crafty Carbon Build

Still have questions? If you’re here to compare Mondraker Crafty Carbon kits we’d expect you to have questions! Don’t be shy, our team is here to help you define what you need to take your bike build from “this is good” to “man, this is DIALED.”

Compare the Mondraker Crafty Carbon geo with other Mondraker bikes as well as models from class leaders like Ibis and Yeti!

Enduro MTB Geo Comparison

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

When you buy a bike from BikeCo.com you’re not getting simply a forwarded box.

Our team goes through quality control checks, builds, tunes and provides a base setup for each bike. This allows us a better chance to find the rare mechanical warranty issue, to ensure that the linkage and bearings are properly setup.

A suspension setup guide is provided and our team will begin working with you to ensure as your riding develops with your new bike suspension settings, cockpit setup, tire pressures, etc are addressed to keep you progressing.

Since we build every bike we can also offer part swaps and upgrades our competition simply cannot!

Looking for different tires? Brakes? Cockpit or Seating? Not a problem. Our team is happy to help you. Chat with our sales team about during and after purchase incentives on riding gear and accessories as well!

Your new bike typically will arrive with an absolute minimum of work required to get you on the trails. Usually this involves installing the handlebars, adjusting the headset and mounting the front and rear wheel. It’s that easy – and if you have questions you have access to the sales team and a variety of videos from BikeCo.com to help you.

Questions? No problem. Hit us up.