OneUp Components E-Bar Carbon Handlebar 800mm Wide 35mm Dia

Inquire About This Product

OneUp Components E-Bar Carbon Handlebar, 35mm Dia

OneUp E-Bar’s feature the ovalized center section to improve bar compliance and minimize hand fatigue. The E-Bar features internal routing as well as slots for a clean eMTB cockpit setup.

Some stems will not compliment these features – if you have questions please contact our team about the best stem options for your setup.

Bar Clamp Diameter (mm): 35.0 mm

Defined Color: Black

Color: Black

Width: 800 mm, minimum width 750mm

Rise: 35 mm

Back Sweep (deg): 8 deg

Upsweep: 5 deg

Weight:  35mm rise 238g (published by OneUp)

Material: Carbon

From OneUp’s Site:

OneUp E-Bar Compatibility

The OneUp E-Bar features internal routing for Shimano STEPS switch units, Bosch LED Remote and all other switch units with a connector diameter less than 6.5mm.

The wire port diameter in the bar is 6.5mm and the minimum switch wire length required to internally route is 650mm.

Specialized, Bosch Purion or Rocky Mountain remote power mode controllers cannot be internally routed through the Carbon E-Bar.

If you have a switch with a removable wire (EP8, E8000, E7000) you can install a 650mm or longer Shimano EW-SD50 (1st gen EP8, E8000 & current E7000) wire or the EW-SD300 (2nd Gen EP8 & E8000) wire.

The Orbea Rise does not have a handlebar mounted display unit as it connects to your smartphone. It has the EW-EN100 junction and removable EW-SD50 wire.

If you don’t have a removable wire on your switch, you need to buy a new switch with a removable wire (SW-E7000-L) with a wire length of at least 700mm.

Or you you can add the EW-JC200 2 port junction and an EW-SD50 extension wire

You will require a stem that can accomodate a center wire port. Two piece faceplate stems are ideal.

Grips with a single outer clamp are not compatible with this bar.

Learn more about the patented OneUp Handlebar shape and how it’s design improves your riding by increasing compliance without compromising power transfer.

The OneUp Components Carbon Handlebar is one of our favorite products for improving small bump compliance as your increase your suspension’s compression and ramp rate. Check out this video for other products and tips then read the rest of the blog here for an even more in depth look at how and why you can keep the small bump feel while increasing your suspension’s firmness as your speeds increase.

Trying to get an image to detail the shape of a OneUp Carbon Handlebar is always a challenge! Here we use the lighting to force an illuminated edge from the bar end to center. You can see how the light changes direction on both the top and bottom surfaces of the OneUp Carbon Handlebar in the rise transition. This “flare” from the standard (front) radius gives the bar unique on trail advantages, most notably assisting with better small bump compliance. As more riders look for a bit more support from the suspension finding additional small bump compliance in tires and cockpit is increasingly critical. Wondering what’s right for you? Chat with our expert sales team about the details that separate our products, and our shop from the competition.

Not sure if this is the right bar for your riding? Check out our post on Choosing the Right MTB Handlebar Here.

Shop Other eMTB and MTB Handlebars at BikeCo.com

OneUp E-Bar Carbon Handlebar

35mm rise:
MPN: 1C0702
UPC:   056062821947

Return to Top of Page