Shimano 4 piston finned pads utilize the additional material to radiate heat away from the pad designed to improve pad life and reduce brake fade.
Shimano H03C Metal Pad with Fins
PRODUCT CODE: Y8VT98020
Metal pads are rated for high stopping power.
Shimano H03A Resin Pad with Fins
PRODUCT CODE: Y1XM98020
Less noise than Metal pads
Shimano H03A and H03C Compatibility
Pad Shape #51
Compatible with Shimano 4 piston brakes including:
Other Shimano 4 Piston Brake Pads
Shimano XT M8020, Saint M820 and Zee M640 use H03A or H03C finned pads on this page or the D02S and D03S non-finned options.
Do You Need To Replace Your Rotors As Well?
The nature of brake pad and rotor interface means they will wear together. Ideally you will be able to replace your brake pads a few times before you need to replace your rotors. however there can be some conditions that make it necessary to replace the rotors sooner. Let’s look at a few.
The easiest thing to check is the rotor wear limit.
A Magura rotor that is less than 1.8mm wide is considered worn. SRAM rotors less than 1.5mm are worn. Shimano rotors less than 1.5mm or if any of the aluminum “Ice-Tech” material appears are considered worn.
Running too thin of a rotor will compromise brake bite as well as heat capacity. In extreme cases it can lead to rotor separation which will cause damage and potentially severe injury.
If the previous pads have worn shapes into the rotor your performance will be compromised. Whether the rotor shows knife edge, bulge or convex anything but parallel surfaces will cause contact patch issues.
These issues will create extreme “hot-spots” on the new brake pads which, in some conditions, can super heat the pad – glazing it and compromising the friction coefficient (bite, power, heat capacity are all effected).
We have seen cases where new brake pads become unusable due to this severe heat modifying the pad’s makeup glazing not just the contact surfaces but essentially glazing the entire pad material.
A rule of thumb is rotors should be replaced about every three or four sets of pads. It will pay dividends to check the rotor’s condition before installing new pads!