MTB FRAMES

Ibis & Yeti Frames

Whether you’re looking to upgrade your bike with an MTB frame swap or researching the heart of your next custom build BikeCo.com has the very best in 27.5″, 29″ and Mullet options for your review.

Frames from industry leaders Ibis and Yeti provide excellent performance, a wide tuning range and great customer support.

From endurance cross country to full EWS trail slayers there is a bike for nearly every rider in our lineup.

Learn more about the Ibis and Yeti frames in our frame overview tabs below or click for an interactive geometry comparison below!

Looking for quick details on the best Ibis and Yeti MTB frames? Click on the tabs for a model overview.

Ibis Frame Details

Ibis Ripmo

The Ibis Ripmo’s second evolution takes the bike to another level in both pedaling efficiency as well as downhill capacity.  The DW Suspension ratios were modified to allow riders to choose between air and coil shock options.

Most riders will gravitate to the FOX Float X2 air shock. With it’s high and low speed rebound as well as high and low speed compression the X2 can be tuned to be lively under power while keeping a confident personality in burlier terrain.

29″ Wheels
147mm Rear Travel
160mm or 170mm Fork Options
64.9 degree Head Tube Angle
7 Year Frame Warranty

Ibis Ripley

The current Ibis Ripley maintains the poppy, fun personality riders came to expect from the trail / light enduro 29er with a notable improvement: increased lateral stiffness.

By increasing the Ripley’s lateral stiffness Ibis built a trail bike capable of attacking light enduro terrain even for heavier riders, which may have felt the previous frame was just a bit light when heavier riders cornered hard.

The Ripley is capable of carrying up to 2.6″ tires providing the ability to “tire up” or “tire down” depending on your riding.

29″ Wheels
120mm Rear Travel
130mm or 140mm Fork Options
66.5 degree Head Tube Angle
7 Year Frame Warranty

Ibis Mojo

The “Modern Trailbike” is a pretty wide ranging term? Well, modern trailbikes do have to excel in more areas than ever. Does a trailbike mean all day adventure rides? After work rips with your friends? Being able to lean into your favorite chunky trail? Yes, of course.

The Mojo is designed to have a nimble and fast accelerating personality capable of hanging in bigger terrain than you might think a 130mm rear travel 27.5 would be confident in.  Pairing the forgiving nature of DW Suspension’s deep travel with the cutting edge geometry Ibis is known for the Mojo does just what the designers set out to build: it’s a fun bike to ride, in a wide range of terrain at a wide range of ground speeds. Sounds simple right? But it’s a hard goal to hit.

Riders looking for even more out of their Ibis Mojo should investigate a Mullet or 29″ front wheel option. The larger wheel radius increases the Mojo’s roll-over capacity allowing it to more easily cross burly terrain. A longer fore to aft contact patch on a 29 wheel provides increased braking and cornering traction as well. Chat with us about 29″ fork travel options on a Mullet Ibis Mojo!

27.5″ Wheels Stock, Mullet Capable
130mm Rear Travel
Stock with 140mm 27.5″ Fork
65.4 degree Head Tube Angle
7 Year Frame Warranty

Yeti Frame Details

Yeti SB115

Well, whether you’re looking for an all day adventure bike, an aggressive XC bike or the new down-country term has you salivating the Yeti SB115 should be on your short list for review.
Thinking about a bit more fork on your SB115? Chat with our team about the best options available as well as how a 140mm fork will modify the bike’s overall personality.

29″ Wheels
115mm Rear Travel
130mm Fork Stock
67.6 degree Head Tube Angle
Lifetime Frame Warranty

Yeti SB130

The SB130 is one of the most popular bikes on the market as it confidently tackles an incredible range or riding.
All day trail adventures to Park Days this bike will get you there. Available in the stock configuration 130mm rear travel paired with 150mm fork travel or the Lunch Ride setup featuring 137mm rear travel with 160mm fork travel.

29″ Wheels
130mm Rear Travel or 137mm Lunch Ride
150mm Fork Stock or 160mm Lunch Ride
65.5 degree Head Tube Angle
Lifetime Frame Warranty

Yeti SB140

Modern trailbikes have to be good. Actually they need to be more than just good, they need to be versatile. The Yeti SB140 has those traits nailed.
The modern geometry and dampers allow smaller, more nimble bikes to confidently rip into bigger terrain. The Yeti SB140 offers riders a bike with lively performance at a wide range of ground speeds. Looking for a little more? Chat with our team about SB140 Mullet options to get a bit more front end cornering, braking and roll over.

27.5″ Wheels (or 29″ front Mullet Option)
140mm Rear Travel
160mm Fork Stock or 150mm/140mm Mullet Options
65 degree Head Tube Angle
Lifetime Frame Warranty

Yeti SB150

Ready to go fast? 29″ wheels have the momentum and roll over angle to maintain big speed. The Yeti SB150 frame gives you control of those big rollers in the burliest terrain. Designed with steep, frankly brutal, EWS courses in mind the Yeti SB150 is truly race-bred. A bit taller bottom bracket than the SB130 gives it some added “bash-ability” while pedaling amazingly well for a bike as capable in the huge stuff as the SB150.

29″ Wheels
150mm Rear Travel
170mm Fork
64.5 degree Head Tube Angle
Lifetime Frame Warranty

Yeti SB165

The Yeti SB165 takes “more is better” to another level. With the most rear travel in the Yeti lineup this bike is capable of smashing down the biggest lines. But it’s not a one trick pony.
A 29″ front wheel Mullet option gives the bike additional cornering and braking traction. De-traveling the Mullet allows the bike to maintain its’ designed personality by staying close to the axle to crown and headtube angle.
Want to go the other direction? The SB165 is approved for triple crown forks – so spec that park destroyer now!

27.5″ Wheels (or 29″ front wheel Mullet option)
165mm Rear Travel
180mm Fork (170mm or 160mm Mullet option)
63.5 degree Head Tube Angle
Lifetime Frame Warranty

Current Marketplace Details:

Yeti Completes and Frames are not currently available for purchase online and will be listed as out of stock or back-ordered. However, we invite you to contact our team for in-stock updates, bike availability, ETAs and order details!

Aluminum Ibis Frames, the Ripmo AF and Ripley AF are currently not shown as they’ve been allocated almost exclusively for complete builds. If you’re interested in an AF frame contact our team and we’re happy to see what we can do for you!

We have in-bound orders with stock available with delivery etas well ahead of “placed now” orders – again, we invite you to contact our team for availability and ETAs.


Compare Frame Geo with BikeCo’s Interactive Graphic Overlay below

Want to compare the Reach, Stack, Headtube Angle, Wheelbase of your favorite Ibis and Yeti frames?
Click on the Compare Frame Geometry tab for an interactive Geometry Comparison allowing you to overlay different models and sizes to help find the perfect fit.

Interactive Geometry Comparison

Bottom bracket height, chainstay, reach, stack, headtube angle, fork offset as well as wheelbase have been illustrated per manufacturer websites. Seatpost and headtube heights are relatively accurate for vertical dimension. Exact frame shape, etc produced with artistic license.

Images are centered horizontally by the bottom bracket. Axle heights are static representing the same wheel / tire sizing. Bottom bracket heights from ground per manufacturer dimension. Chainstay length is measured from the bottom bracket center. Wheelbase is illustrated from rear axle forward.

If you have any questions on sizing or frame comparison contact our expert sales staff today!

Ibis frames feature DW Suspension designs.

Yeti offers the unique Switch Infinity platform.

All of these bikes are designed to provide unbeatable trail personality without compromising pedaling efficiency.

Each of these suspension designs produces a different riding personality. Questions on which is right for you? No problem. Our team is here to help.

Contact our sales team and review your riding specifics and aspirations based on how they will pair with the ideal MTB frame.

BikeCo also offers services you won’t find anywhere else. Each new bike or frame goes through our Frame Prep service for ultimate performance and longevity.

We also offer Pro Tune rear suspension on FOX shocks which personalize the performance band based on your riding specifics.

BikeCo Pro Tune Suspension

BikeCo Pro Tune Suspension isn’t just for racers. In fact, many novice riders find instant improvements when the suspension’s performance window is dialed in for them.

This means that each click of adjustment is more precise for you for improved setup. No longer will one click create knife-edge performance. Pro Tune Suspension improved small bump compliance, support and heat resistance.

Our team will work with you to understand your riding and produce a personalized tune. You will receive a setup sheet which gives you a great point of reference to return to if you get in the weeds playing with the dials (it happens to the best of us).

Probably the biggest benefit of the Pro Tune Suspension is the after sales attention from our team to help you understand and dial in air pressure, compression, rebound as well as volume spacing.

BikeCo's Joe Binatena Pro Tunes a Fox DPX2 Rear Shock

Return to top of page.


Contact Me Regarding This Product

  • Please contact me by:

  • Question on availability? Spec? Compatibility?
    Our team will be in contact within 24 hours!


  • Hidden
  • Hidden
  • Hidden
  • This field is for validation purposes and should be left unchanged.