arc Archives - BikeCo.com

Shopping hardtail bikes? But, looking for something that will blur the performance lines a bit: plenty fast, efficient as they come but confident and playful to descent? You’re in the right spot. Compare the Yeti ARC build kits and learn about common swaps and upgrades to the Yeti builds.

The Yeti ARC is spec’d with a 130mm fork which produces a 67 degree head tube angle. This produces a bike that is well balanced for quick handling without becoming nervous when you point it downhill.

Yeti offers a range of kits for the ARC hardtail including the T4 XX Transmission, T3 X0 Transmission, T2, C2 and Frame Only options. Keep reading for more insight on the Yeti kit differences as well as common upgrades and swaps clients take advantage of.

Yeti ARC completes are available in Turquoise, Rhino and Cobalt!

Questions on spec, performance or availability?

Shop Yeti ARC Bikes at BikeCo.com

Ready to order your Yeti ARC? Use the tabs below to see in-stock here at BikeCo.com or available ARC Completes and Frames at Yeti. Contact our team about available upgrades and part swaps to the factory Yeti SB120 builds.

If you don’t see the size and color you’re interested in contact our team for availability timeline at 949-470-1099.

In-Stock and Available Yeti ARC Bikes and Frames

ARC Kits

Find the perfect ARC in-stock here at BikeCo.com or available at Yeti (approximately 7-10 days for delivery).

T4 XX Trans. $8,400

Shop Available and In-Stock Yeti ARC T4 XX Transmission Builds

T3 X0 Trans. $6,900

Shop Available and In-Stock Yeti ARC T3 X0 Transmission Builds

T2 $5,800

Shop Available and In-Stock Yeti ARC T2 Builds

C2 $4,600

Shop Available and In-Stock Yeti ARC C2 Builds

Frame $2,100

Shop Available and In-Stock Yeti ARC Frames

The Yeti ARC is probably equal parts a rider’s only bike as well as a quiver bike for specialty days. As such you might find some differences in the kits or swaps and upgrades make more sense for one rider or the other.

Part swaps and upgrades on the Yeti kits are common especially in Cockpit, Brakes, Suspension Tuning and Wheels. Getting the perfect spec on your new bike will help you get the most out if it in a wide range of terrain. Questions on spec? No worries that’s what were here for. Wondering what you might ask? Which brakes are best for your riding style and preference? What cockpit size and setup should you run? Are there areas that you might spend a little bit extra but gain a lot of performance? All valid questions on purchases at this level. Let’s go over your questions today!

Read on for more details as well as links to specific model pages with additional data. Compare Yeti ARC geo between available sizes as well as against other class leading bikes.

Compare Yeti ARC Kits

What are the major differences? How do you narrow your options? Here come the details to compare Yeti ARC kits!

_

Use these tabs to review the spec differences between the various Yeti ARC kits! Learn more about common part swaps and upgrades to the Yeti factory builds.

Compare Yeti ARC Build Kits

Yeti ARC Kit Specs
Build Kits	2024 C2	2024 T2	2024 T3 X0 Transmission	2024 T4 XX Transmission	2023 C3	2023 T3	2023 T4
MSRP	$4,600 SALE: $3,680	$5,800 SALE: $4,640	$6,900	$8,400	Closeout Pricing Available	Closeout Pricing Available	Closeout Pricing Available
Fork	FOX Performance 34 GRIP, 130mm	FOX Factory 34 FIT4, 130mm	FOX Factory 34 FIT4, 130mm	FOX Factory 34 FIT4, 130mm	FOX Performance 34 GRIP, 130mm	FOX Factory 34 FIT4, 130mm	FOX Factory 34 FIT4, 130mm
Shock	N/A	N/A	N/A	N/A	N/A	N/A	N/A
Wheelset	Crank Bros Synthesis Enduro 30	RaceFace ARC with DT Swiss 350	RaceFace ARC with DT Swiss 350	RaceFace ARC with DT Swiss 350	Crank Bros Synthesis Enduro 30	RaceFace ARC with DT Swiss 350	RaceFace ARC with DT Swiss 350
Front Tire	Maxxis Minion DHF 2.6 EXO	Maxxis Minion DHF 2.6 EXO	Maxxis Minion DHF 2.6 EXO	Maxxis Minion DHF 2.6 EXO	Maxxis Minion DHF 2.6 EXO	Maxxis Minion DHF 2.6 EXO	Maxxis Minion DHF 2.6 EXO
Rear Tire	Maxxis Rekon 2.6 EXO	Maxxis Rekon 2.6 EXO	Maxxis Rekon 2.6 EXO	Maxxis Rekon 2.6 EXO	Maxxis Rekon 2.6 EXO	Maxxis Rekon 2.6 EXO	Maxxis Rekon 2.6 EXO
Brakes	SRAM Level TL	SRAM Level TLM	SRAM Level TLM	SRAM Level Ultimate	SRAM Level TL	SRAM Level TLM	SRAM Level Ultimate
Rotors	SRAM Centerline 180	SRAM Centerline 180	SRAM Centerline 180	SRAM Centerline 180	SRAM Centerline 180	SRAM Centerline 180	SRAM Centerline 180
Cranks	SRAM GX Eagle 30t 170mm	SRAM X1 Eagle 30t 170mm	SRAM X0 Eagle T-Type 30t 170mm	SRAM XX T-Type 30t 170mm	SRAM GX Eagle 30t 170mm	SRAM X1 Eagle 30t 170mm	SRAM XX1 Eagle 30t 170mm
Bottom Bracket	SRAM DUB BSA 73	SRAM DUB BSA 73	SRAM DUB BSA 73	SRAM DUB BSA 73	SRAM DUB BSA 73	SRAM DUB BSA 73	SRAM DUB BSA 73
Derailleur	SRAM GX Eagle	SRAM X01	SRAM X0 AXS Transmission	SRAM XX AXS Transmission	SRAM GX Eagle AXS	SRAM XX1 AXS	SRAM XX1 AXS
Shifter	SRAM GX Eagle	SRAM X01	AXS Pod	AXS Pod	SRAM Eagle AXS	SRAM Eagle AXS	SRAM Eagle AXS
Cassette	SRAM GX 1275 10-52t	SRAM X01 1295 10-52t	SRAM X0 Transmission 10-52t	SRAM XX Transmission 10-52t	SRAM GX 1275 10-52t	SRAM X01 1295 10-52t	SRAM XX1 1299 10-52t
Chain	SRAM GX Eagle	SRAM GX	SRAM X0 Flattop	SRAM XX Flattop	SRAM GX Eagle	SRAM GX	SRAM XX1 Eagle
Headset	Cane Creek 40 Integrated	Cane Creek 40 Integrated	Cane Creek 40 Integrated	Cane Creek 110 Integrated	Cane Creek 40 Integrated	Cane Creek 40 Integrated	Cane Creek 110 Integrated
Grips	ODI Elite Pro	ODI Elite Pro	ODI Elite Pro	ODI Elite Pro	ODI Elite Pro	ODI Elite Pro	ODI Elite Pro
Burgtec Ride Wide Alloy Enduro 35x760mm	Burgtec Ride Wide Alloy Enduro 35x760mm	Yeti Carbon 35x760mm	Yeti Carbon 35x760mm	Yeti Carbon 35x760mm	Burgtec Ride Wide Alloy Enduro 35x760mm	Yeti Carbon 35x760mm	Yeti Carbon 35x760mm
Stem	Burgtec Enduro MK3 50mm	Burgtec Enduro MK3 35x50mm	Burgtec Enduro MK3 50mm	Burgtec Enduro MK3 35x50mm	Burgtec Enduro MK3 50mm	Burgtec Enduro MK3 35x50mm	Burgtec Enduro MK3 35x50mm
Seatpost	OneUp Dropper (S 180mm, M 210mm, L/XL 240mm)	FOX Transfer (S 150mm, M 175mm, L/XXL 200mm)	FOX Transfer (S 150mm, M 175mm, L/XXL 200mm)	FOX Factory Transfer (S 150mm, M 175mm, L/XXL 200mm)	OneUp Dropper (S 180mm, M 210mm, L/XL 240mm)	FOX Transfer (S 150mm, M 175mm, L/XXL 200mm)	FOX Factory Transfer (S 150mm, M 175mm, L/XXL 200mm)
Saddle	WTB Silverado Custom	WTB Silverado Custom	WTB Silverado Custom	Ergon SM Enduro	WTB Silverado Custom	WTB Silverado Custom	Ergon SM Enduro

Kit Differences

T Series verus C Series: TURQ Carbon vs Carbon Frames

Yeti specs TURQ Carbon frames for T series builds and Carbon series for C spec kits.

TURQ Carbon layups are slightly lighter than their Carbon counterparts, but most notably the TURQ Carbon frames are a bit more vibrant and stay that way longer into their service lives.

Heavier riders will really want to pay attention to frame selection. The additional stresses from a larger rider are easier for the more robust TURQ carbon layup to handle.

Lighter riders may still prefer the increased vibrance of the TURQ Carbon frames, but are less likely to see shorter service intervals as heavier riders may.

Yeti ARC Kit Differences

The ARC T-Series builds include the T4 XX Transmission, T3 X0 Transmission and T2 builds. Carbon series bikes are available in the C2 kit.

Let’s highlight the differences between Yeti’s factory builds then jump over to the Common Upgrades and Swaps tab for more details on how you may want to modify your new bike to dial in it’s performance.

FOX Factory or Performance Suspension

Yeti spec’s the T-Series ARC with a FOX Factory 34 FIT4 with 130mm travel.

On FOX Factory suspension riders have the ultimate suspension damper at their fingertips. The FIT4 fork damper offers adjustment through PSI, Volume Spacing, Rebound, Low Speed Compression as well as a 3 position “climb” switch. This provides a wide range of tuning capacity especially via the low speed compression to adjust support for cornering and descending.

The C-Series bikes feature FOX Performance 34 GRIP forks. Performance suspension is adjustable with PSI, Volume Spacing, Rebound and Compression depending on the exact spec.

Check out the Common Upgrades section for details on Pro Tune Suspension and Performance Upgrades for FOX Suspension.

Transmission versus Cable Driven Build Kit

Yeti ARC TURQ series bikes are available in wireless SRAM T-Type Transmission kits, the T4 XX Transmission and T3 X0 Transmission, as well as a cable driven X01 bike.

On the C-Series bike a the cable driven GX C2 build is available.

Along with the wireless capacity the new Transmission T-Type drivetrain is notably stronger and longer lasting than previous options.

Wheels

Depending on your weight and riding style the stock Yeti wheels may be something to really focus on. The C-Series bikes feature Crank Bros Synthesis Enduro wheels while the T-Series bikes spec the DT Swiss 350 with RaceFace ARC option.

Questions on the stock spec? No problem, our team is here to help. Give us a call, email or use the chat to discuss the ARC kit differences.

Then keep reading about common swaps and upgrades to the ARC builds on the next tab.

Common Upgrades & Swaps

Yeti ARC Upgrades and Swaps

The right spec your bike takes performance from “pretty good” to “this is insane”. BikeCo is here to ensure you get the right parts, right at delivery. Small swaps and upgrades are common for every mountain bike. Here are some of the popular Yeti ARC Upgrades and Part Swaps.

The Yeti ARC offers a nice range of price point builds. Riders will find few components on the ARC builds they would consider “no-go”. From the C2 to the way to the T4 XX Transmission builds there is a lot of value for your dollar in the Yeti build.

Riders develop spec preferences, particularly on contact points, brakes, wheels or suspension. Whether it’s a must have performance swap or upgrade to getting you that perfect part in the right color to personalize the ARC’s performance or look we have you covered.

Common ARC Upgrades

These are areas we commonly see riders update a bike purchase. Some swaps and upgrades are personal preference, others are budget or performance choices. Questions? Chat, email or call our expert sales staff and we will help you dial in your perfect Yeti ARC build.

Rider Contact Points

Do you have a preferred grip and pedal go-to?

We can provide a range of grips with variable patterns, technology and shape to improve your riding. There might even be a grip in a color to set off your Turquoise, Rhino or Cobalt ARC build.

When purchasing a new bike many riders find it a good time to refresh their pedals. We have the best clipless and flat options for a wide range of riding styles at unbeatable prices.

Tires

Like contact points its common for riders to have a “must-have” go to tire spec. This is one of the most frequent swaps on builds from any manufacturer. With notable performance differences between tread pattern, compound and sidewall lets make sure we get you on the perfect tire setup.

The ARC is spec’d with a Maxxis Minion DHF EXO front tire.

While MOST adventure riders gravitate to the EXO sidewall some prefer the lightest option out there the simple skinwall tire. Lighter, but with less damping and protection this isn’t as common as it was a few years ago. Damping through tires has become better understood and taken advantage of, particularly on hardtail bikes. To this end a few riders shop the EXO Plus sidewall balancing the weight with the improvement in small bump compliance.

Spec’d with a 2.6 front tire there is some added suspension through the higher volume tire. Some riders will prefer a quicker tire like a narrower DHF, although if you’re really looking for a faster tire you would probably consider a faster tread pattern like the Rekon. If you’re on the fence it’s generally a good idea to start with a slightly more aggressive tire for more grip than to build a new bike you’ll struggle to ride…

Yeti spec’d Maxxis Rekon 2.6 EXO sidewall rear tires on the ARC bikes. Typically this is seen paired with a faster front tire option. Riders who’ve gone to a Rekon front tire should swap to a Rekon or Ikon rear for a balanced feel.

Swapping to an Aggressor is a very popular rear tire for this bike when paired with the DHF front. A niche of riders will want a bit more in the rear and go to DHF or DHR II tread pattern for increased grip.

It really comes down to what you like and where you’re using it. Questions on what tires are right for your riding style and locale? No problem – chat with our team about swapping to tires perfect for you on your new MTB.

Thinking about rim protection? We have that covered too. We often see riders use combinations of CushCore PRO and CushCore XC or even a single rim protection strip (usually on the rear tire). Questions? Let us know!

Cockpit

Along with Brakes, Cockpit is the most common place we see part swaps and upgrades. Since fit is so important to your bike it’s not surprising that you’ll want to work with a resource that has more than 1 option!

Handlebar rise and overall stiffness also improve the personalization and performance of your bike. As you trim your bars they will get stiffer due to the decreased lever arm – so if you’ve got narrower shoulders you’ll likely want to start with a narrower bar rather than cutting tons off. Similarly getting the right bar rise will help your setup. Ideally you want your hands in a power position. Too low and the bike will try to pull “under” and out in steep chutes. Too tall and you’ll lose front end grip. While some of this is adapted with headset spacers the preference for performance and looks is generally to have 15-30mm of spacers and get the rest of the rise from the handlebar.

Looking for suggestions? Chat with our team about hand positioning and the advantages of getting the right handlebar rise on your new rig. We have the best in the market from OneUp, Tag, Renthal and Raceface.

Headset

Many riders will update the Cane Creek 40 to a Cane Creek 110 or Chris King headset that will last the service life of the frame. Chris King riders can choose from a range of colors as well.

Brakes

This is one of the most common swaps or upgrades on any bike. Brakes that compliment your riding style and preference make a huge difference on trail. We offer class leading options in a variety of price points from Hope, Magura, Shimano and TRP.

Most riders will update brakes on the Yeti SB140. Updating with BikeCo means we will credit you for the SRAM brakes and get your preferred stoppers on your new bike.

Shimano brakes are very popular and are spec’d on several of the build options. Shimano brakes have good overall power with quick lever throw. This produces a brake with a strong feel.

TRP brakes are similar to the Shimano lineup. The TRP brakes provide a touch more overall power and extra modulation compared to Shimano offerings.

Riders who prefer a bit more modulation or “feel” to their brakes gravitate towards Hope and Magura.

The latest Hope Tech 4 updates have improved their power. This puts the Hope Tech 4 in the Shimano and Magura range for overall power while retaining the excellent modulation Hope has been known for.

Magura brakes are the most frequent swap or upgrade across all Ibis builds. Riders who appreciate modulation and power will find Magura excellent in both aspects. Magura offers models with across a wide price range allowing budget friendly swaps or upgrades. Riders looking for the most adjustability or tuning for their brakes will shop the MT7 with HC3 levers.

Custom Wheels

Handbuilt or custom wheels are another popular upgrade no matter what brand you’re shopping. Custom wheels allow riders to spec a rim, spoke and hub combination as well as build specifics for the ultimate performance.

Custom wheels for Ibis builds usually feature slightly narrower rim options. This will decrease the volume slightly as well as shifting the tire’s shape to provide more grip in high lean cornering. We see many riders work with NOX carbon or WTB, Factor and RideFast alloy options.

Riders also will find traction from using the right spokes and build techniques. Our team will help you define this at time of purchase to ensure you maximize performance and longevity.

Popular hubs from Chris King, Industry Nine, Onyx and Factor are spec’d on Yeti SB140 builds. All of these hubs are available in a range of colors to highlight your build.

Pro Tune Suspension

Take your bike’s performance to the next level with our proprietary Pro Tune Suspension. Our team will custom tune your FOX fork and rear shock and narrow the performance from the FOX Factory range to a more precise setup designed for your riding style, aggression, ground speed, size and terrain.

This is one of the biggest upgrades to any bike – having the suspension dialed in as well as having a resource like BikeCo to help you fine tune the bike at time of delivery and as your riding speeds increase!

BikeCo Pro Tune Suspension – because Every Click Counts.

Dialing in the perfect ARC Build

Still have questions? If you’re here to compare Yeti ARC kits we’d expect you to have questions! Don’t be shy, our team is here to help you define what you need to take your bike build from “this is good” to “man, this is DIALED.”

Frame Details

Here are some details about the Yeti ARC frame.

ARC Frame Details
Frame Material	Carbon
Fork Travel	120-140mm
Rear Travel	n/a Hardtail
Rear Shock Size	n/a
Wheel Size	29″”
Max Tire	2.6
Rear Brake Max	180
Bottom Bracket	73mm Threaded
Chainline	55mm
Derailleur Hanger	SRAM UDH
Headset	Integrated 41 Upper, 52 Lower
Seatpost Dia.	31.6
Warranty	Lifetime

Yeti ARC Geometry

The Yeti ARC is available in four sizes: Small, Medium, Large and X-Large. This allows a wide range of rider heights access to the ARC hardtail.

Use the tabs below for more info on the ARC Geo, compare sizes with the Geo Chart as well as see how the ARC measures up against other bikes on the Comparison tab.

_

Like other Yeti bikes the ARC is sized from rider height, flexibility, application, as well as leg and arm length. Riders who find their height in the cross-over of sizes will determine the better size based typically on inseam, flexibility and riding style.

Those with longer legs tend to upsize to improve riding position. This will increase the wheelbase and produce a bike with a bit more overall speed capacity. Going to a larger size will produce a ride that isn’t quite as snappy as a smaller option would be.

Riders with longer torsos or looking for a more “poppy” trail feel will tend to downsize. Although, with modern MTB frames designed to accommodate increased dropper post lengths riders who prefer the added wheelbase may upsize – so long as the reach doesn’t compromise stem size availability or put a rider “too far” over the front wheel.

Use the tabs to compare ARC sizes as well as other against other MTB geo.

ARC Geo

ARC Geometry Chart
Size	Small	Medium	Large	X-Large
Factory Sizing Guide (inches)	5’1″ – 5′ 7″	5′ 5″ – 5′ 11″	5′ 10″ – 6′ 3″	6’1″ – 6′ 7″
Rear Travel	n/a	n/a	n/a	n/a
Fork Travel	130mm stock	130mm stock	130mm stock	130mm stock
Head Tube Angle (degrees)	67	67	67	67
Trail	not listed	not listed	not listed	not listed
Reach	420	445	465	490
Stack	632	639	645	654
Top Tube Length	557	604	626	653
Head Tube Length	95	103	110	120
Seat Tube Length (inches)	15	16.1	17.7	19.5
Seat Tube Angle (degrees)	76	76	76	76
Saddle Height for ST Angle	not listed	not listed	not listed	not listed
Standover	723	722	720	720
BB Height	310	310	310	310
BB Drop	not listed	not listed	not listed	not listed
Chainstay Length	433	433	433	433
Wheelbase	1144	1172	1194	1223

2024 Yeti Sale Bikes

Limited Time 2024 Yeti Sale! Get 20% off 2024 Trail bikes like the SB140, SB135 and SB120.

Contact our team for exact availability and details at 949-470-1099

Questions on spec, performance or availability?

_

Click on these tabs to learn more about the purchasing process from BikeCo.com

Payment

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

Bikes from BikeCo.com!

When you buy a bike from BikeCo.com you’re not getting simply a forwarded box.

Our team goes through quality control checks, builds, tunes and provides a base setup for each bike. This allows us a better chance to find the rare mechanical warranty issue, to ensure that the linkage and bearings are properly setup.

A suspension setup guide is provided and our team will begin working with you to ensure as your riding develops with your new bike suspension settings, cockpit setup, tire pressures, etc are addressed to keep you progressing.

Since we build every bike we can also offer part swaps and upgrades our competition simply cannot!

Looking for different tires? Brakes? Cockpit or Seating? Not a problem. Our team is happy to help you. Chat with our sales team about during and after purchase incentives on riding gear and accessories as well!

Your new bike typically will arrive with an absolute minimum of work required to get you on the trails. Usually this involves installing the handlebars, adjusting the headset and mounting the front and rear wheel. It’s that easy – and if you have questions you have access to the sales team and a variety of videos from BikeCo.com to help you.

Questions? No problem. Hit us up.

2024 Yeti Sale Models

*2023 Yeti Sale Bikes listed where available

_

29″ SB140 & SB140 Lunch Ride Sale Models:

SB140 Sale Bikes include 2023 models as well as the 2024 SB140 C2 complete!

*Wheel & Suspension Upgrades are available

Shop All Available 2023 and 2024 Yeti SB140 29er Bikes Here!

'24 Yeti SB140 C2

2024 Yeti SB140 C2 Sale Bikes

The 2024 Yeti SB140 C2 Completes are on sale! Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 SB140 T4

2023 Yeti SB140 T4 Sale Bikes

The 2023 Yeti SB140 T4 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 SB140 T3

20243 Yeti SB140 T3 Sale Bikes

The 2023 Yeti SB140 T3 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 SB140 LR T4

2023 Yeti SB140 Lunch Ride T4 Sale Bikes

The 2023 Yeti SB140 Lunch Ride T4 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 SB140 Lunch Ride T3

2023 Yeti SB140 Lunch Ride T3 Sale Bikes

The 2023 Yeti SB140 Lunch Ride T3 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 SB140 LR C3

2023 Yeti SB140 Lunch Ride C3 Sale Bikes

The 2023 Yeti SB140 Lunch Ride C3 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

2024 SB140 C2 GX (29″)

MSRP: $6,000
Sale: $4,800

2023 SB140 T4 (29″)

MSRP: $10,300
Sale: $8,200

2023 SB140 T3 (29″)

MSRP: $8,600
Sale: $6,900

2023 SB140 Lunch Ride T4 (29″)

MSRP: $10,500
Sale: $8,400

2023 SB140 Lunch Ride T3 (29″)

MSRP: $8,800
Sale: $7,000

2023 SB140 Lunch Ride C3 (29″)

MSRP: $7,800
Sale: $5,900

_

2024 SB135 Sale Models:

2024 Cable Actuated SB135 T2 X01, SB120 LR C2 GX and SB120 C2 GX bikes.
Click the SB135 Sale Inventory tab for available Yeti SB135 Sale bikes!

*Wheel & Suspension Upgrades are available

Shop All Available SB135 Models Here!

'24 SB135 C2

2024 Yeti SB135 C2 Sale Bikes

The 2024 Yeti SB135 C2 Complete are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'24 SB140 Lunch Ride C2

2024 Yeti SB135 Lunch Ride C2 Sale Bikes

The 2024 Yeti SB135 Lunch Ride C2 Complete are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'24 SB135 T2

2024 Yeti SB135 T2 Sale Bikes

The 2024 Yeti SB135 T2 Complete are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

Yeti SB135 T2 Complete in Turquoise at BikeCo

2024 SB135 T2 Turq X01

MSRP: $7,500
Sale: $6,000

2024 SB135 Lunch Ride C2 Turq GX

MSRP: $6,200
Sale: $4,960

2024 SB135 C2 Turq GX

MSRP: $6,000
Sale: $4,800

_

SB120 Sale Models:

2024 Cable Actuated SB120 T2 X01, SB120 C3 GX Transmission and SB120 C2 GX bikes as well as 2023 SB120 AXS kits including T4 and T3 kits.
Click the SB120 Sale Inventory tab for available Yeti SB120 Sale bikes!

*Wheel & Suspension Upgrades are available

Shop all Available 2023 and 2024 Yeti SB120 Bikes Here

'23 SB120 T4

2023 Yeti SB120 T4 Sale Bikes

The 2023 Yeti SB120 T4 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 SB120 T3

2023 Yeti SB120 T3 Sale Bikes

The 2023 Yeti SB120 T3 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'24 SB120 T2

2024 Yeti SB120 T2 Sale Bikes

The 2024 Yeti SB120 T2 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'24 SB120 C2

2024 Yeti SB120 C2 Sale Bikes

The 2024 Yeti SB120 C2 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'24 SB120 LR C3

2024 Yeti SB120 Lunch Ride C3 Sale Bikes

The 2024 Yeti SB120 Lunch Ride C3 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

Yeti SB120 T1 Complete in Dust at BikeCo

2024 SB120 T2 Turq X01

MSRP: $7,200
Sale: $5,760

2024 SB120 Lunch Ride C3 GX Transmission

MSRP: $6,800
Sale: $5,440

2024 SB120 C2 GX

MSRP: $5,800
Sale: $4,640

2023 SB120 T4 AXS

MSRP: $10,900
Sale: $8,720

2023 SB120 T3 AXS

MSRP: $8,400
Sale: $6,600

2024 Yeti ARC T2 Sale Bikes

The 2024 Yeti ARC T2 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

_

ARC Sale Models:

2024 Cable Actuated ARC T2 X01 and ARC C2 GX bikes as well as 2023 ARC AXS kits including T4, T3 and C3 kits.
Click the ARC Sale Inventory tab for available Yeti ARC Sale bikes!

*Wheel & Suspension Upgrades are available

Shop All Available 2023 and 2024 Yeti ARC Hardtail Bikes Here!

'24 ARC T2

'24 ARC C2

2024 Yeti ARC C2 Sale Bikes

The 2024 Yeti ARC C2 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 ARC T4

2023 Yeti ARC T4 Sale Bikes

The 2023 Yeti ARC T4 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 ARC T3

2023 Yeti ARC T3 Sale Bikes

The 2023 Yeti ARC T3 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

'23 ARC C3

2023 Yeti ARC C3 Sale Bikes

The 2023 Yeti ARC C3 Completes are on sale!
Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

Yeti ARC T1 Complete in Cobalt BikeCo So Cal Dealer

2024 ARC T2 Turq X01

MSRP: $5,800
Sale: $4,640

2024 ARC C2 GX

MSRP: $4,600
Sale: $3,680

2023 ARC T4 AXS

MSRP: $8,400
Sale: $6,700

2023 ARC T3 AXS

MSRP: $6,200
Sale: $5,000

2023 ARC C3 AXS

MSRP: $5,500
Sale: $4,100

_
160E C1

_

160E Sale Models:

There are a few discounted Yeti 160E bikes available.

C1 Completes, formerly $10,100 have been repriced to $7,600. Limited Stock!

*Wheel & Suspension Upgrades are available

Shop all 2023 and 2024 Yeti 160E’s Here

160E C1

Yeti 160E C1 Bikes

Don’t see the color or size you’re interested in? Contact us for availability details at 949-470-1099.

_
SB140 27.5 Sale Inventory

_

SB140 27.5″ Sale Models:

There are a few discounted Yeti SB140 27.5″ bikes available.

These are popular starting points for custom upgrades such as a Mullet 29″ front end, brakes, custom wheels, etc.

*Wheel & Suspension Upgrades are available

Shop 2023 Yeti SB140 27.5″ bikes here

SB140 27.5 Sale Inventory

Scroll through available stock of Yeti SB140 27.5 Sale bikes. These are a great opportunity to build a baller Mullet on a budget!
Contact our team to get your bike on order today! 949-470-1099

_
SB165 Sale Inventory

_

30% off SB165 Closeout Sale Models:

There are a few discounted Yeti SB165 bikes available at 30% off!

These are popular starting points for custom upgrades such as a Mullet 29″ front end, brakes, custom wheels, etc.

*Wheel & Suspension Upgrades are available

Shop Yeti SB165 bikes here

SB165 Sale Inventory

Scroll through available stock of Yeti SB165 Sale bikes. These are a great opportunity to build a baller Mullet on a budget!
Contact our team to get your bike on order today! 949-470-1099

Posted on June 2, 2023 by nate collins — Leave a comment

Custom Yeti ARC Hardtail

Custom Yeti ARC with Onyx NOX wheels build

Enjoy some detail photos of this custom Yeti ARC Hardtail build by BikeCo.com

This Yeti ARC highlights the trail capacity of the hardtail ARC maintaining a nimble feel with instant torque utilizing a single speed drivetrain coupled to the instant engagement Onyx Vesper hubs tied to NOX Composite Farmlow carbon rims.

Yeti ARC custom spec with FOX Factory orange fork

Our team takes great pride in producing dream bikes – whether they’re full custom spec bikes like this single speed ARC or a factory build with the perfect cockpit, the right brakes, whatever you need to make it yours.

Keep reading for more details on the spec of this build to get ideas for your next dream bike.

Cranks: Race Face Era Carbon
Chainring: RaceFace DM
Chain Tensioner: Rohloff XC/SS Twin Pulley
Chain: KMC X11 Silver
Bottom Bracket: Chris King ThreadFit 30
Cassette: Reverse XD Single Speed Kit 14t
Pedals: Shimano XTR SPD XC PD-M9100

Hubs: Onyx Vesper
Rims: NOX Farlow Enduro Layup
Front Tire: Maxxis Forekaster 3C MaxxTerra EXO
Rear Tire: Maxxis Rekon 3C MaxxTerra EXO
Fork: FOX Factory 34 GRIP2 with Shiny Orange Lowers

Handlebar: RaceFace NEXT R 35x800mm 20mm rise
Stem: RaceFace Turbine R Stem 35mm
Brakes: Magura MT7 Next with HCW Lever
Rotors: Magura Storm HC
Seatpost Remote: PNW Loam Lever
Grips: PNW Loam Grip

Saddle: Ergon SM Comp
Seatpost: PNW Rainier Gen 3

Shop other Yeti ARC builds at BikeCo.com

Return to Top of Page

Yeti Factory Completes Category

YETI COMPLETES & FRAMES

Yeti builds are available in a range of price points, each with a lot of value in the budget.

Yeti offers the Turq or T-Series builds (and frames) with their top tier carbon layup as well as the improved Switch Infinity 2 design.
The C-Series builds are a more cost conscious carbon layup to allow more riders to enjoy the hard to beat Yeti feel.
Scroll down to learn more about Yeti’ bikes, compare kits and Shop Available Yeti Bikes & Frames!

Compare
In-Stock & Available

Compare

Compare Yeti Complete Kits

SB120 & SB120 Lunch Ride: C2, C3, T2, T3 & T4 /   SB135 & SB135 Lunch Ride: C2, T2, T3, T4
SB140 & SB140 Lunch Ride (29): C2, C3, T2, T3, T4 /   SB160: C2, C3, T2, T3, T4
160E eMTB: C1, T2, T3 /   ARC: C2, T2, T3, T4

In-Stock & Available

Shop In-Stock & Available Yeti Completes & Frames

Don’t see exactly what you’re looking for?
Use the chat, inquire form, email or give us a call at 949-470-1099
to get your perfect Yeti build dialed in and on the way.

Compare Yeti SB120 and SB120 Lunch Ride Bikes

Yeti SB120: 29″ 120mm frame, 130 or 140mm fork

Shop in-stock and available Yeti SB120 builds. The SB120 is available in a pair of configurations, the standard SB120 features a 130mm fork while the SB120 Lunch Ride spec’s a 140mm fork and a more aggressive rear shock. Learn about common part swaps and upgrades to the various SB120 builds available from BikeCo.com. SB120 Frame Only options are available for custom builds or part swaps.

View All Available SB120 or Compare SB120 bikes here (including 2023 SB120 Closeouts!)

Yeti SB135 T4 XX Transmission Complete in Cherry

Compare Yeti SB135 & SB135 Lunch Ride Completes

Yeti SB135: 27.5″ 135mm frame, 150 or 160mm fork

Shop in-stock and available Yeti SB135 completes. Yeti’s SB135 is available in a pair of configurations. The standard SB135 features a 150mm fork while the SB135 Lunch Ride spec’s a 160mm fork and a more aggressive rear shock. Learn about common part swaps and upgrades to the various SB135 builds available from BikeCo.com. SB135 Frame Only options are available for custom builds or part swaps.

Shop In-Stock and Available SB135 or Compare SB135 bikes here

Compare Yeti SB140 and SB140 Lunch Ride Completes

Yeti SB140: 29″ 140mm frame, 150 or 160mm fork

Shop in-stock and available Yeti SB140 completes. Yeti’s 29″ SB140 is available in a pair of configurations. The standard SB140 features a 150mm fork while the SB140 Lunch Ride spec’s a 160mm fork and a more aggressive rear shock. Learn about common part swaps and upgrades to the various SB140 builds available from BikeCo.com. SB140 Frame Only options are available for custom builds or part swaps.

Shop In-Stock and Available SB140 Lunch Ride or SB140 bikes here

Yeti SB160 T4 XX Transmission Complete in Radium

Compare all Yeti SB160 Bikes

Yeti SB160: 29″ 160mm frame, 170mm fork

Shop in-stock and available Yeti SB160 completes. Learn about common part swaps and upgrades to the various SB160 builds available from BikeCo.com. SB160 Frame Only options are available for custom builds or part swaps.

Shop In-Stock and Available SB160 completes here

2024 Yeti SB165 T3 X0 Transmission Spruce

Compare all Yeti SB165 Bikes

Yeti SB165: 27.5″ 165mm frame, 170mm 29″ fork

Shop in-stock and available Yeti SB165 completes. Learn about common part swaps and upgrades to the various SB165 builds available from BikeCo.com. SB165 Frame Only options are available for custom builds or part swaps.

Shop In-Stock and Available SB165 Bikes

Yeti 160E T3 X0 Transmission Complete in Turquoise

Compare Yeti 160E Builds

Yeti 160E eMTB: 29″ 160mm frame, 170mm fork

Shop in-stock and available Yeti 160E completes. Learn about common part swaps and upgrades to 160E builds available from BikeCo.com.

View All Available 160E or Compare 160E bikes here

2024 Yeti ASR T3 X0 Transmission Complete in Turquoise

Compare Yeti ASR Build Kits

Yeti ASR: 29″ 115mm frame, 120mm fork

Shop in-stock and available Yeti ASR completes. Take your cross country bike to the next level with BikeCo’s unmatched attention to detail on your Yeti ASR. Available in C and Turq series carbon layups and builds.

Shop In-Stock and Available Yeti ASR completes