Yeti ARC Frames

11/30/23: Under Construction! Contact our team for details, upgrades, swaps, sizing or other questions.

Shop Available 29″ Yeti ARC Frames below

Questions on spec, performance or availability?

Available: ARC Frame

Contact us if you don’t see the bike you’re looking for!

Contact Us about a Yeti ARC Build

Return to Top of Page

Yeti SB160 Frames

11/30/23: Under Construction! Contact our team for details, upgrades, swaps, sizing or other questions.

Shop Available 29″ Yeti SB160 Frames below

Questions on spec, performance or availability?

Available: SB160 Frame

Contact us if you don’t see the bike you’re looking for!

Contact Us about a Yeti SB160 Build

Return to Top of Page

Yeti SB135 Frames

11/30/23: Under Construction! Contact our team for details, upgrades, swaps, sizing or other questions.

Shop Available 29″ Yeti SB135 Frames below

Questions on spec, performance or availability?

Available: SB135 Frame

Contact us if you don’t see the bike you’re looking for!

Contact Us about a Yeti SB135 Build

Return to Top of Page

Yeti SB120 Frames

11/30/23: Under Construction! Contact our team for details, upgrades, swaps, sizing or other questions.

Shop Available 29″ Yeti SB120 Frames below

Questions on spec, performance or availability?

Available: SB120 Frame

Contact us if you don’t see the bike you’re looking for!

Contact Us about a Yeti SB120 Build

Return to Top of Page

Yeti SB140 29 Frames

Shop available Yeti SB140 Lunch Ride Frames her at BikeCo.com.

The 29″ Yeti SB140 Lunch Ride features carbon fiber front and rear triangles with 140mm of rear travel and compatible with 150mm or 160mm forks.

Keep reading for more details on the Yeti SB140 Frame!

Looking for a full custom build or frame swap? BikeCo.com has you covered with a selection of the best in MTB. If you have questions on your project email, chat or call to speak with our expert sales staff. We are here to help you get your project dialed in.

Questions on spec, performance or availability?

The 2024 SB140 is a 29″ frame available in five sizes:
Small, Medium, Large, X-Large and XX-Large.

Choose from 4 colors:
Raw Carbon, Sage, Sangria and Turquoise

SB140 Lunch Ride Frame

MSRP: $4 ,400

Yeti SB140 Lunch Ride Frame in Turquoise, Sangria, Sage and Raw Carbon

Use the Shop tab to view In-Stock and Available SB140 Lunch Ride Frames

Ready to pull the trigger on your new Yeti SB140 Lunch Ride Frame? Use the Shop tab above to find the perfect available size and color.

Still have questions? Keep reading for more details including popular parts to the Yeti Lunch Ride Frames.

Click on these tabs to learn more about the purchasing process from BikeCo.com

Shop Available Yeti SB140 Lunch Ride Frame

Don’t see what you’re looking for? Contact us for details: 949-470-1099

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

When you buy a bike from BikeCo.com you’re not getting simply a forwarded box.

Our team goes through quality control checks, builds, tunes and provides a base setup for each bike. This allows us a better chance to find the rare mechanical warranty issue, to ensure that the linkage and bearings are properly setup.

A suspension setup guide is provided and our team will begin working with you to ensure as your riding develops with your new bike suspension settings, cockpit setup, tire pressures, etc are addressed to keep you progressing.

Since we build every bike we can also offer part swaps and upgrades our competition simply cannot!

Looking for different tires? Brakes? Cockpit or Seating? Not a problem. Our team is happy to help you. Chat with our sales team about during and after purchase incentives on riding gear and accessories as well!

Your new bike typically will arrive with an absolute minimum of work required to get you on the trails. Usually this involves installing the handlebars, adjusting the headset and mounting the front and rear wheel. It’s that easy – and if you have questions you have access to the sales team and a variety of videos from BikeCo.com to help you.

Questions? No problem. Hit us up.

See key Yeti SB140 Frame specs. Review the frame details as well as learn about common additions for home builders.

Yeti SB140 Frame Details

SB140 Headset Spec

Upper Integrated 41mm
Lower Integrated 52mm
Yeti SB140 Frame Headset Detail

SB140 Headset Details

The Yeti SB140 uses an integrated 41/52 headset spec.

Many home builders will have BikeCo install a the headset prior to shipment.

We suggest Cane Creek 110 or Chris King headsets. With proper service these should last the lifetime of your SB140 frame.

Questions? Chat with our team about your SB140 project today.

Yeti SB140 Frame Suspension Detail

Yeti SB140 Frame Suspension Spec

Shock FOX Factory Float X, 210x55mm. Included with Frame.
Fork Stock spec 160mm for Lunch Ride or 150mm standard.

SB140 Suspension Details

The SB140 Frame features the FOX Factory Float X shock. This shock offers riders a tremendous tuning range. Designed as a shock capable of all day Trail adventures while being confident into Enduro level terrain the Float X is a great option.

BikeCo Pro Tune Suspension

Take your bike’s performance to the next level with our Pro Tune Suspension services.

FOX has the best suspension on the market – but why not make it even better? At BikeCo our suspension team will narrow the performance band of the stock suspension based on your size, riding style, ground speed, aspirations and terrain.

The abridged version? FOX is build for every rider size at every riding speed. You’re not every rider! Chat with our team about how BikeCo Pro Tune suspension will take your riding to the next level. Because Every Click Counts.

SB140 Seattube Spec

Seattube Diameter 31.6mm
Yeti SB140 Frame Seattube Detail

SB140 Seattube Details

The SB140 uses a 31.6mm diameter seatpost.

Do not force a seatpost past the maximum insertion depth, bottom out. Seattube or frame failure may occur.

Work with our team if you have sizing questions on your SB140 build!

Yeti SB140 Frame bottom bracket Detail

SB140 Drivetrain Spec

Bottom Bracket Threaded 73mm BSA
Chain Guide Mount ISCG 05
Chainline 55mm – UDH Compatible
Q-Factor “only wide q factor cranks” per Yeti site

SB140 Frame Bottom Bracket & Chainline Details

The Yeti SB140 Frame utilizes a threaded 73mm BSA bottom bracket. Depending on your crank selection there are a variety of bottom brackets available.

Many home-builders have us install the bottom bracket prior to shipping the frame.

Chris King is a popular bottom bracket for threaded bottom bracket bikes. A range of adapters allows both SRAM and Shimano specs to be used.

Yeti SB140 Chainline

The current Yeti SB140 as well as the Yeti SB140 Lunch Ride are a 55mm chainline to be compatible with the SRAM UDH derailleur hanger. The SB140 is SRAM Transmission compatible.

Wide Q Factor cranks are required for proper chainline on the SB140.

Wondering if you have the right cranks for the project? Chat with our team, or even better – order your cranks through BikeCo and we will ensure you get the right setup for the new chainline standard.

SB140 Frame Details

Brake Mount 180mm Post Mount – 220mm max rotor with adapter
Rear Axle Boost 148mm
Derailleur Hanger SRAM UDH (requires 55mm compatible chainline cranks)
Yeti SB140 Frame Brake and Derailleur Detail

Rear Brake and Axle Details

The SB140 features a 180mm post mount rear brake. With an adapter the maximum rotor size is 220mm.

Hub spacing is 148mm Boost.

The derailleur hanger is SRAM UDH. This requires a 55mm chainline crank. The Ripmo is SRAM Transmission compatible.

Yeti SB140 Build Kits

Looking for details on other Yeti SB140 Completes? Follow the links below or Compare and Shop All Yeti SB140 Bikes here

SB140 Lunch Ride Completes

SB140 Completes

Yeti SB140 Geometry

The Yeti SB140 is available in five sizes: Small, Medium, Large, X-Large and XX-Large. There is a SB140 available for nearly every rider.

Use the tabs below for more info on the SB140 Geo, compare sizes with the Geo Chart as well as see how the SB140 measures up against other Trail to Enduro MTB bikes on the Comparison tab.

Like other Yeti bikes the SB140 is sized from rider height, flexibility, application, as well as leg and arm length. Riders who find their height in the cross-over of sizes will determine the better size based typically on inseam, flexibility and riding style.

Those with longer legs tend to upsize to improve riding position. This will increase the wheelbase and produce a bike with a bit more overall speed capacity. Going to a larger size will produce a ride that isn’t quite as snappy as a smaller option would be.

Riders with longer torsos or looking for a more “poppy” trail feel will tend to downsize. Although, with modern MTB frames designed to accommodate increased dropper post lengths riders who prefer the added wheelbase may upsize – so long as the reach doesn’t compromise stem size availability or put a rider “too far” over the front wheel.

Use the tabs to compare SB140 sizes as well as other against other enduro MTB geo.

Yeti SB140 Geometry
Small Medium Large X-Large XX-Large
Reach 435mm 465mm 485mm 510mm 525mm
Stack 614mm 617mm 621mm 631mm 651mm
Head Tube Angle 65.4 deg 65.4 deg 65.4 deg 65.44 deg 65.4 deg
Wheelbase 1184mm 1217mm 1242mm 1273mm 1300mm
Effective Top Tube 571mm 602mm 623mm 650mm 670mm
Seat Tube Length 14.4 in 15.7 in 17.3 in 18.5 in 19.1 in
Effective Seat Tube Angle 77.5 deg 77.5 deg 77.5 deg 77.5 deg 77.5 deg
Head Tube Length 92mm 95mm 100mm 112mm 134mm
Stand Over Height 722mm 729mm 733mm 735mm 740mm
Fork Travel 150mm 150mm 150mm 150mm 150mm
Bottom Bracket Height 339mm 339mm 339mm 339mm 339mm
Yeti SB140 Lunch Ride Geometry
Small Medium Large X-Large XX-Large
Reach 430mm 460mm 480mm 505mm 520mm
Stack 617mm 620mm 625mm 635mm 655mm
Head Tube Angle 65 deg 65 deg 65 deg 65 deg 65 deg
Wheelbase 1188mm 1221mm 1246mm 1277mm 1304mm
Effective Top Tube 573mm 603mm 624mm 652mm 671mm
Seat Tube Length 14.4 in 15.7 in 17.3 in 18.5 in 19.1 in
Effective Seat Tube Angle 77 deg 77 deg 77 deg 77 deg 77 deg
Head Tube Length 92mm 95mm 100mm 112mm 134mm
Stand Over Height 726mm 733mm 737mm 739mm 744mm
Fork Travel 160mm 160mm 160mm 160mm 160mm
Bottom Bracket Height 342mm 342mm 342mm 342mm 342mm

Compare the Yeti SB140 geo with other Yeti bikes as well as models from class leaders like Ibis and Mondraker!

Enduro MTB Geo Comparison

Shop Available Yeti SB140 Frames

Don’t see what you’re looking for? Contact us for availability details as well as part swaps and upgrades: 949-470-1099

Contact Us about a Yeti SB140 Build

Return to Top of Page

Ibis DV9 Frame

The hardtail with an Ibis pesonality: competent, fun and confident in a wide range of terrain. The DV9 is special. Learn why buying your Ibis DV9 Frame from BikeCo.com is the best bet for that perfect build, setup and tune.

With #TheBestInMTB BikeCo.com has an expert team to ensure your project is dialed in. Whether you’re building a full custom or doing a frame swap we are here to help you navigate the best (and right) bits for the new Ibis DV9 frame.

The Ibis DV9 frame is available in 4 sizes:
Small, Medium, Large and X-Large.

and 2 great colors:
Muddy Waters and Purple Crush.

Ibis DV9 Frame $1,499 – Sale $1,124.25

Ibis DV9 Hardtail Frame in Muddy Waters as well as Purple Crush.

View In-Stock and Available Ibis DV9 frames on the Shop tab. Or contact our team for details to order this carbon Ibis hardtail!

BikeCo.com is the right place if you’re shopping for an Ibis Exie USA frame.

Here at BikeCo.com we specialize in sport to pro race MTB. We understand the game is in the details at this level.

Whether you’re spec’ing a full custom or working on a frame swap project we have you covered. Our team is here to help you understand which parts you may need for a frame swap and ensure you get the right parts for your riding.

Click through these tabs for more details on the buying experience and advantages working with BikeCo.com. Shop in-stock and available Exie USA Frames. Learn about our payment options. Define availability.

Want to go over details with an expert? Click the link below for a contact form, call or email today.

Shop In-Stock and Available Ibis DV9 Frames
(if you don’t see in-stock or available bikes below contact our team for lead time!)

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

When you buy a bike from BikeCo.com you’re not getting simply a forwarded box.

Our team goes through quality control checks, builds, tunes and provides a base setup for each bike. This allows us a better chance to find the rare mechanical warranty issue, to ensure that the linkage and bearings are properly setup.

A suspension setup guide is provided and our team will begin working with you to ensure as your riding develops with your new bike suspension settings, cockpit setup, tire pressures, etc are addressed to keep you progressing.

Since we build every bike we can also offer part swaps and upgrades our competition simply cannot!

Looking for different tires? Brakes? Cockpit or Seating? Not a problem. Our team is happy to help you. Chat with our sales team about during and after purchase incentives on riding gear and accessories as well!

Your new bike typically will arrive with an absolute minimum of work required to get you on the trails. Usually this involves installing the handlebars, adjusting the headset and mounting the front and rear wheel. It’s that easy – and if you have questions you have access to the sales team and a variety of videos from BikeCo.com to help you.

Questions? No problem. Hit us up.

Check out Ibis DV9 frame details as well as learn about common additions for home builders.

Ibis DV9 Frame Details

Ibis DV9 Frame headtube details
DV9 Headset Spec
Upper IS41/28.6 – Integrated
Lower IS52/40 – Integrated

DV9 Headset Details

The DV9 frame features an integrated headset with an IS 41/28.6 upper and a IS 52/40 lower. The most popular headsets for the DV9 fame are the Cane Creek 110 or Chris King options.

Integrated headsets are often installed with a layer of grease, however, using a proper bearing retaining compound will minimize potential noise and wear during its service life.

Many home builders will have our team install a headset and hang a fork prior to shipment.

DV9 Seatube Spec
Seatube Diameter 31.6mm
Maximum Seatpost Insertion Small 180mm, Medium 250mm, Large 250mm, X-Large 270mm
Ibis DV9 Frame seattube details

Exie USA Seattube Details

The Ibis Exie USA uses a 31.6mm diameter seatpost.

Do not force a seatpost past the maximum insertion depth or seattube failure may occur. The XC Exie USA often uses a smaller dropper post than a trail or enduro bike. Spec your bike with a seatpost that gives you the correct seating position without compromising the maximum insertion.

Work with our team if you have sizing questions on your Exie USA build!

Ibis DV9 Frame in axle and brake details
DV9 Frame Brake & Axle Details
Brake Mount 160mm Post Mount – 180mm max rotor with adapter
Rear Axle Boost 148mm
Derailleur Hanger SRAM UDH

Rear Brake and Axle Details

Ibis DV9 Frame’s have a 160mm post mount rear brake. Using an adapter the maximum rotor size is 180mm.

Hub spacing is 148mm Boost.

The derailleur hanger is SRAM UDH. The DV9 is SRAM Transmission compatible.

DV9 Drivetrain Spec
Bottom Bracket Threaded 73mm BSA
Chain Guide Mount n/a
Chainline 55mm
Chainring Clearance Up to 34t (Round)
Ibis DV9 Frame bottom bracket details

DV9 Frame Bottom Bracket & Chainline Details

The Ibis DV9 Frame utilizes a threaded 73mm BSA bottom bracket. Depending on your crank selection there are a variety of bottom brackets available.

Many home-builders have us install the bottom bracket prior to shipping the frame.

Chris King is a popular bottom bracket for Ibis bikes. A range of adapters allows both SRAM and Shimano specs to be used.

Ibis DV9 Chainline

The DV9 spec requires cranks for a 55mm chainline.

Wondering if you have the right cranks for the project? Chat with our team, or even better – order your cranks through BikeCo and we will ensure you get the right setup for the new chainline standard.

Other Ibis DV9 Builds

Want to compare factory Ibis DV9 Builds? BikeCo compares the DV9 kits head to head here!

The DV9 is available in size kits. With the first three options, Deore, GX and SLX spec’d with a FOX Performance Step-Cast 34 fork to maximize savings.

The DV9 XT, GX Transmission and XX Transmission bikes are spec’d with the FOX Factory Step-Cast 34 with FIT4 Remote damper for the ultimate performance.

Learn about the DV9 XX SL Transmission, GX Transmission, XT, SLX, GX and Deore builds as well as common spec swaps and upgrades with the links below.

Ibis DV9 Frame Geometry

Learn more about the Ibis DV9 Frame geometry on the tabs below.

Ibis DV9 Geometry

The DV9 is offered in Small through X-Large and designed for rides from 5′ 0″ to 6′ 5″ in height.

Along with height DV9 riders will want to compare sizes based on inseam and arm length as well. Riders on the sizing cusp will reference leg length to help determine the ideal sizing.

Another thing to take into account sizing a hardtail like the DV9 is what your intended use is and will you be able to get your cockpit setup in an ideal position. If you’re building a more playful, confident DV9 you’ll want to keep your stem and bars in a more trail or even enduro type setup. Shorter stem, often with higher rise bars. For a more “racy” build a slightly longer stem with lower bars will likely be a more ideal positioning.

Wondering which bike provides you the best fit? Our expert team is here to help you define how your size, riding style, terrain and aspirations will effect your ideal sizing. Reach out to our team about your Ibis DV9 purchase by chat, email or phone!

Ibis DV9 Geometry Chart
Small Medium Large X-Large
Reach 404mm 435mm 470mm 511mm
Stack 615mm 622mm 635mm 658mm
Head Tube Angle 66.5 deg 66.5 deg 66.5 deg 66.5 deg
Wheelbase 1100mm 1145mm 1186mm 1237mm
Effective Top Tube 580mm 608mm 640mm 675mm
Seat Tube Length 14 in 16 in 18 in 20 in
Effective Seat Tube Angle 74 deg 74.5 deg 75 deg 76 deg
Saddle Height at Saddle Offset 650mm 700mm 750mm 820mm
Head Tube Length 85mm 95mm 110mm 135mm
Bottom Bracket Drop 65mm 65mm 65mm 65mm
Stand Over Height 693mm 714mm 762mm 776mm
Fork Travel 120mm 120mm 120mm 120mm
Trail 114mm 114mm 114mm 114mm

Compare the Ibis DV9 geo with other sizes as well as models from class leading bikes from Mondraker, Nukeproof and Yeti!

Enduro MTB Geo Comparison

DV9 Frame Complete Part Numbers
DV9 Frame Complete Part Numbers MPN UPC
DV9 Frame Complete, X-Large in Muddy Waters DVC4BR0000000 840345305565
DV9 Frame Complete, X-Large in Purple Crush DVC4PR0000000 840345305589
DV9 Frame Complete, Large in Muddy Waters DVC3BR0000000 840345305527
DV9 Frame Complete, Large in Purple Crush DVC3PR0000000 840345305558
DV9 Frame Complete, Medium in Muddy Waters DVC2BR0000000 840345305480
DV9 Frame Complete, Medium in Purple Crush DVC2PR0000000 840345305503
DV9 Frame Complete, Small in Muddy Waters DVC1BR0000000
DV9 Frame Complete, Small in Purple Crush DVC1PR0000000 840345305466

Contact BikeCo about the Ibis DV9 Frame


Use this contact form or shop in-stock and available DV9 Frame here.

Shop In-Stock and Available Ibis DV9 Frames:


(if you don’t see in-stock or available bikes below contact our team for lead time!)

Ibis Exie USA Frame

This is the cross country bike you’ve been looking for. A 100mm carbon fiber banger build here in the States. The Ibis Exie USA Frame is the starting point for a wide range or XC, down-country and light trail bikes.

Keep reading for more details on this special frame and why you’ll want to buy your Ibis Exie USA from BikeCo.com

With #TheBestInMTB BikeCo.com has an expert team to ensure your project is dialed in. Whether you’re building a full custom or doing a frame swap we are here to help you navigate the best (and right) bits for the new UDH Exie USA bike.

Ibis Exie USA frames are available in 4 sizes:
Small, Medium, Large and X-Large.

Choose from 3 great colors:
Cyan Sky, Sage Green and Tangerine Burst.

Ibis Exie USA Frame $4,499

Ibis Exie USA Frame in Cyan Sky, Sage Green as well as Tangerine Burst

Shop In-Stock and Available Ibis Exis USA frames on the Shop tab or contact our team for details.

BikeCo.com is the right place if you’re shopping for an Ibis Exie USA frame.

Here at BikeCo.com we specialize in sport to pro race MTB. We understand the game is in the details at this level.

Whether you’re spec’ing a full custom or working on a frame swap project we have you covered. Our team is here to help you understand which parts you may need for a frame swap and ensure you get the right parts for your riding.

Click through these tabs for more details on the buying experience and advantages working with BikeCo.com. Shop in-stock and available Exie USA Frames. Learn about our payment options. Define availability.

Want to go over details with an expert? Click the link below for a contact form, call or email today.

Shop In-Stock and Available Ibis Exie USA Frames
(if you don’t see in-stock or available bikes below contact our team for lead time!)

Purchasing Steps from BikeCo.com (The Bike Company)

Place Your Deposit
Our team will contact you to go over common questions including common part swaps / upgrades, tuning considerations, initial setup requirements, etc.
Your bike will be built and setup for you including delivery documentation to help you better understand and fine tune the bike’s performance.

Remainder of balance is due at pickup or prior to shipment.
Delivery consultation on-site or available by phone / video conference goes over FAQ on a new MTB or eMTB highlighting common questions on suspension setup, bedding brakes, bolt checks, cockpit and seating fit, etc.
Our team will follow up several times after delivery to help you better understand minute adjustments. And of course we’re always available by phone, email or chat!

Availability Definitions:

IN-STOCK and Available Now!
Typically ready for pickup or shipment within 2-4 business days.
Custom components may change this window (we will advise).

AVAILABLE: Secure this Bike
Shows in-stock at the vendor (stock updated as often as possible).
Order is processed & shipped to BikeCo (typically 3-7 working days), built by BikeCo (usually on the day the product lands at BikeCo) for pickup or shipment.

PRE-ORDER: Due 1st week of XXX
Part of a inbound BikeCo order or shows available in this time window.
May be later or earlier than predicted depending on product availability.
Bike is due at vendor, will be quality checked, processed and shipped. (typically 3-14 business days) Built by BikeCo for delivery.

When you buy a bike from BikeCo.com you’re not getting simply a forwarded box.

Our team goes through quality control checks, builds, tunes and provides a base setup for each bike. This allows us a better chance to find the rare mechanical warranty issue, to ensure that the linkage and bearings are properly setup.

A suspension setup guide is provided and our team will begin working with you to ensure as your riding develops with your new bike suspension settings, cockpit setup, tire pressures, etc are addressed to keep you progressing.

Since we build every bike we can also offer part swaps and upgrades our competition simply cannot!

Looking for different tires? Brakes? Cockpit or Seating? Not a problem. Our team is happy to help you. Chat with our sales team about during and after purchase incentives on riding gear and accessories as well!

Your new bike typically will arrive with an absolute minimum of work required to get you on the trails. Usually this involves installing the handlebars, adjusting the headset and mounting the front and rear wheel. It’s that easy – and if you have questions you have access to the sales team and a variety of videos from BikeCo.com to help you.

Questions? No problem. Hit us up.

Here are some important Ibis Exie USA Frame specs. See frame details as well as learn about common additions for home builders.

Ibis Exie USA Frame Details

Exie USA Headset Spec
Upper IS41/28.6 – Integrated
Lower IS52/40 – Integrated
Ibis Exie USA Frame headtube detail

Exie USA Headset Details

The Exie USA features an integrated headset with an IS 41/28.6 upper and a IS 52/40 lower. The most popular headsets for the Exie USA are the Cane Creek 110 or Chris King options.

Integrated headsets are often installed with a layer of grease, however, using a proper bearing retaining compound will minimize potential noise and wear during its service life.

Many home builders will have our team install a headset and hang a fork prior to shipment.

Ibis Exie USA Frame suspension detail
Exie USA Suspension Spec
Shock FOX Factory DPS Remove, 190x45mm. Included with Frame.
Fork Stock spec 120mm. 100mm option for pure XC riding.

Exie USA Suspension Details

The shock spec’d on the Exie USA is the FOX Factory Float DPS Remote. This allows riders near instant suspension lockout shifts without letting go of the handlebars.

The Factory DPS Remote provides remote actuated Open and Firm mode, Rebound and Air Spring Pressure as well as Volume Spacers for tuning.

Exie USA Suspension Upgrade

Not a frequent upgrade, but heavier riders may prefer the standard 3 position Float DPS (without remote) as it has 3 low speed compression tuning adjustments.

If you’re wondering about how the Exie USA shock stacks up to your riding reach out to our team for more details.

Maybe you’re building and absolute XC machine? If that’s the case you may investigate the 100mm travel fork compared to the 120mm option. With the 100mm fork riders will steepen the headtube angle, reduce the trail measurement, lower the bottom bracket and stack slightly. For a XC race bike this might be ideal to have the most nimble setup possible. However, depending on your courses the 120mm fork could be preferred for better handling downhill where a rider can recuperate a bit.

Chat with our team adding a fork to your Exie USA frame order and get it right, right out of the box.

BikeCo Pro Tune Suspension

Take your bike’s performance to the next level with our Pro Tune Suspension services.

FOX has the best suspension on the market – but why not make it even better? At BikeCo our suspension team will narrow the performance band of the stock suspension based on your size, riding style, ground speed, aspirations and terrain.

The abridged version? FOX is build for every rider size at every riding speed. You’re not every rider! Chat with our team about how BikeCo Pro Tune suspension will take your riding to the next level. Because Every Click Counts.

Exie USA Seatube Spec
Seatube Diameter 31.6mm
Maximum Seatpost Insertion Small 180mm, Medium 250mm, Large 250mm, X-Large 270mm
Ibis Exie USA Frame Seattube detail

Exie USA Seattube Details

The Ibis Exie USA uses a 31.6mm diameter seatpost.

Do not force a seatpost past the maximum insertion depth or seattube failure may occur. The XC Exie USA often uses a smaller dropper post than a trail or enduro bike. Spec your bike with a seatpost that gives you the correct seating position without compromising the maximum insertion.

Work with our team if you have sizing questions on your Exie USA build!

Ibis Exie USA Frame axle and brake detail
Exie USA Frame Brake & Axle Details
Brake Mount 160mm Post Mount – 180mm max rotor with adapter
Rear Axle Boost 148mm
Derailleur Hanger SRAM UDH

Rear Brake and Axle Details

Ibis Exie USA Frame’s have a 160mm post mount rear brake. Using an adapter the maximum rotor size is 180mm.

Hub spacing is 148mm Boost.

The derailleur hanger is SRAM UDH. The Exie USA is SRAM Transmission compatible.

Ibis Exie USA Frame bottom bracket detail
Exie USA Drivetrain Spec
Bottom Bracket Threaded 73mm BSA
Chain Guide Mount Integrated Upper Chain Guide
Chainline 52mm
Q-Factor 168mm

Exie USA Frame Bottom Bracket & Chainline Details

The Ibis Exie USA Frame utilizes a threaded 73mm BSA bottom bracket. Depending on your crank selection there are a variety of bottom brackets available.

Many home-builders have us install the bottom bracket prior to shipping the frame.

Chris King is a popular bottom bracket for Ibis bikes. A range of adapters allows both SRAM and Shimano specs to be used.

Ibis Exie USE Chainline

The Exie USA spec requires 168mm Q factor cranks for a 52mm chainline.

Wondering if you have the right cranks for the project? Chat with our team, or even better – order your cranks through BikeCo and we will ensure you get the right setup for the new chainline standard.

Other Ibis Exie USA Builds

Want to compare factory Ibis Exie USA Builds? BikeCo compares the Exie USA Builds head to head here!

The California built Ibis Exie USA is offered in the three top kits at competitive pricing. Learn about the Exie USA XX SL Transmission, GX Transmission and XT builds as well as common spec swaps and upgrades with the links below.

Ibis Exie USA Geometry

Learn more about the Ibis Exie USA Frame geometry on the tabs below.

Ibis Exie USA Geo

Use these tabs to compare the Ibis Exie USA sizes as well as with bikes from Ibis, Mondraker, Nukeproof and Yeti.

The Exie USA frame is offered in Small, Medium, Large and X-Large. This produces bikes for a wide range of rider height.

Similar to other Ibis bikes the Exie USA is sized on height as well as arm and leg length. Riders will want to find a bike that balances a strong XC position without compromising the great handling Ibis bikes are known for.

Small and Medium Exie USA frames have a bit tighter size spacing than from Medium to Large or Large to X-Large. This is most notable in standover, stack and reach.

Riders looking for a pure XC race bike will look at 100mm fork options. While riders looking for a wider range of terrain will find the 120mm fork provides a playful, comfortable and confident bike.

Questions on sizing? Get in touch with our team and we are happy to go over your details to ensure we get you on the right size bike for your riding!

Ibis Exie USA Geometry Chart
Small Medium Large X-Large
Reach 413mm 439mm 478mm 519mm
Stack 582mm 592mm 606mm 630mm
Head Tube Angle 67.2 deg 67.2 deg 67.2 deg 67.2 deg
Wheelbase 1128mm 1158mm 1202mm 1253mm
Effective Top Tube 584mm 613mm 644mm 675mm
Seat Tube Length 14 in 16 in 18 in 20 in
Effective Seat Tube Angle 73.8 deg 73.8 deg 74.8 deg 75.9 deg
Saddle Height at Saddle Offset
Head Tube Length 85mm 95mm 110mm 135mm
Bottom Bracket Drop 28mm 28mm 28mm 28mm
Stand Over Height 722mm 727mm 748mm 754mm
Fork Travel 120mm 120mm 120mm 120mm
Trail 110mm 110mm 110mm 110mm

Compare the Ibis Exie USA geo with other sizes as well as models from class leading bikes from Mondraker, Nukeproof and Yeti!

Enduro MTB Geo Comparison