BikeCo Tips & Tricks: Adjusting Chris King Hubs
It’s typical to need to adjust Chris King hubs when the bearing breaks in. This video and write-up will show you how easy adjusting King Hubs is.
(excuse the breeze noise in spots on the video – the Covid home studio can be noisy…)
Continue reading BikeCo Tips & Tricks: Adjusting Chris King Hubs
XX1 AXS Ibis Ripmo
Enjoy a couple shots of this banging XX1 AXS Ibis Ripmo build by BikeCo.
When it’s time to build a dream bike work with the best. Whether your dream build is wireless SRAM AXS, Chris King on Enve like this one, or an NX or GX setup BikeCo has you covered. Continue reading XX1 AXS Ibis Ripmo
Yeti SB150 XX1 AXS Build
Enjoy some photos of this Yeti SB150 XX1 AXS Build.
Looking at a frame swap, a factory complete, a semi-custom or a full custom build? BikeCo.com is the shop you want to spec, build, tune and help you dial in after the sale.
This Yeti SB150 features a Fox X2 rear shock with BikeCo Pro Tune designed to maximize small bump compliance and fine tune ramp as well as compression settings. This particular rider is lighter so ensuring the right proprietary blend of oils to maximize flow rate without compromising heat capacity is important. Continue reading Yeti SB150 XX1 AXS Build
Custom Ibis Ripmo – XX1, King, Nox
Enjoy some pics of another banging Custom Ibis Ripmo before it heads home!
Continue reading Custom Ibis Ripmo – XX1, King, Nox
Custom Yeti SB100: King / Nox
Enjoy some shots of the latest custom Yeti SB100 from BikeCo.com.
This build is designed for the ultimate trail bike / light enduro package. Whether on an all day adventure or a quick after work rip this SB100 is dialed in. Continue reading Custom Yeti SB100: King / Nox
Ibis Mojo 3 with Chris King
This Ibis Mojo 3 XT build is set off with Mango Chris King hubs, bottom bracket and headset. The Mojo 3 is an all day capable trail to light enduro 27.5″ chassis. This frame features 130mm of rear travel paired with a 140mm fork. With the 35mm internal rims 2.3 to 2.8″ tires are at home on this setup. Continue reading Ibis Mojo 3 with Chris King
Custom Ibis Ripmo Complete – King / Enve
Enjoy a few pics of this Custom Ibis Ripmo Complete by BikeCo.com. This no-holds-barred spec has industry leading components across the board.
Custom Ibis Ripmo Complete
Frame: Ibis Ripmo Tangerine Sky
Ibis continues hitting the bright colors out of the park. As good as this frame looks in the shop, it looks 10x better in natural sunlight.
Continue reading Custom Ibis Ripmo Complete – King / Enve
Custom Yeti SB130 – King / Nox!
Enjoy some pics of this Custom Yeti SB130 that BikeCo recently sent home with it’s new owner.
This build dials in performance from tip to tail. Like many of our favorite builds this custom Yeti SB130 has attention to Frame, Suspension, Wheels and then fills in the blanks based on rider disposition and budget.
Frame: Yeti SB130 Turq Series Matte Spruce colorway.
Love this colorway when it’s built up. This Custom Yeti SB130 has an amazing balance with the matte spruce frame and matte slate Chris King components. Continue reading Custom Yeti SB130 – King / Nox!
Yeti SB150 Custom Build
Enjoy a couple pictures of this Yeti SB150 Custom Build by BikeCo.com. Whether you’re in the market for a frame, factory complete or a complete custom spec banger BikeCo has you covered.
The SB150 is Yeti’s no-holds-barred EWS machine. The 150mm rear travel is controlled with a Fox DHX2 coil shock with SLS spring. (The Yeti SB150 and SB130 are currently the only bikes utilizing a shock extender approved for coil shocks)
Continue reading Yeti SB150 Custom Build
How To Open Chris King Bearings for Service
Pro Tips by BikeCo’s Joe Binatena.
How-To below video.
Continue reading How to Open Chris King Bearings for Service